1protecting people from contacting electricity& wires
2prevent ground fault fire;distribute power energy
3prevent overload
DZL25 Series Leakage Circuit Breaker
Quick Details
Place of Origin: Zhejiang, China | Brand Name: DELIXI | Model Number : DZL25 Series |
Category:Leakage circuit breaker | Rated voltage : 380V | Rated current : up to 200A |
Rated frequency : AC50Hz | Poles Number: 3P 4P |
|
Packaging & Delivery
Packaging Detail: | wooden case or according to the customer's requirements |
Delivery Detail: | within 10-45 days after confirming the full payment |
Minimum order Quantity: | DZL25-100, 800pcs DZL25-200, 500pcs /Pieces Meet customer needs |
Specifications
Features:
1,These series of circuit breakers are mainly used in distribution network which is AC50Hz, rated voltage 380V, rated current up to 200A.
2,For protecting people from indirectly contacting electricity.
3,Or can prevent fire caused by ground fault due to equipment insulation part damage.
4,could be used to distribute power energy, protect wires and prevent overload , short circuit of power source equipment.
5,to switch wires or start electric motor infrequently.
Standards and Certificates:
Standards: GB 6829, GB 14048.2, IEC 60947-2, IEC 60755
Certificate:CCC
The technical parameter of DZL25 is as follows:
Ordinary working conditions and installing conditions
1. The temperature maximum rate around the device should not be over +40°C, the minimum temperature should not be lower than -5°C, and the average temperature in 24h should not be higher than +35°C.
Note1: when the working condition has the minimum temperature -10°C to, customer should declare to manufacturer when ordering the device.
Note2: when maximum temperature is over +40°C or minimum is lower than -25°C in working condition, customer should consult the factory.
2. The altitude of the place where the machine be installed in should not be higher than 2000 meters.
3. The relative humidity of atmosphere should not be above 50% when the surrounding temperature is +40°C. It is allowed to work in comparatively high relative humidity when the temperature is comparatively low. For instance, when the relative humidity reaches 90% in +20°C, user should take some appropriate treatments to get rid of the occasionally appeared moist.
4. Class of pollution: Class 3
5. Category of installation: Category 3
6. Any field direction of the external field of the installation site should not be 5 times above what geomagnetic field has.
7. Generally, the breaker should be installed vertically. The upward direction of the switch handle represents the power is on. No matter what direction the switch handle points to, the deviation degree is allowed to be up to 2°.
8. There should not be obvious collision and vibration in or near installation position.
Order Notice:
Customers should clarify the name of the product, model, specifications, poles, protecting features, rated current, rated residual action current, order quantity. For instance, you should write as order DZL25-100, 4 poles power distribution protecting leakage circuit breaker, rated current 100A, rated residual action current 200mA, 100 pieces in total.
The required items should be written as: DZL25-100/ 4901 100A 200mA 100 pieces.
If there are special requirements for the leakage circuit breakers you can consult with the manufacturer to solve the problems.
