Suitable for conversion of about 10.5 m road sleeper, passenger vehicles
Dimensionsmm | 9840×2450 | |||
Trackmm | Front | 2030 | ||
Rear | 1860 | |||
Wheel base mm | 5000 | |||
Front/rear suspension mm | 1870/2970 | |||
Min ground clearance mm | Rear axle | 260 | ||
Ground clearance of upper frame (leaded) | Front axle | >900 | ||
Rear axle | >920 | |||
Dry mass (kg) | 3800 | |||
Authorized total mass (kg) | 14000 | |||
Front /rear axle load (kg) | 5000/9000 | |||
Max speed (km/h) | 100, 90 | |||
Min turning diameter (m) | 208 | |||
Max grade ability (%) | 30 | |||
Limited mode fuel consumption/100km(L) | 26 | |||
Ramp angle (°) | Approach angle (°) | 13 | ||
Departure angle (°) | 10 | |||
Equipment | ||||
Engine | Model | YC6J210-20 | ||
Type | In line ,six cylinder,intercooling,turbo, Gas injection engine | |||
Rated power(Kw/r/min) | 155/2500 | |||
Max torque (Kw/r/min) | 710/1400-1600 | |||
Gearbox | Model & operation way | 6 speed mechanicalrod controlling EQ140 | ||
Files bit rate ratio | 6.54/3.87/2.168/1.442/1.00/0.814/6.533(R ) | |||
Front axle pattern | Fist type & l axle | |||
Rear axle | pattern | Ramming welding rear axleone grade differential | ||
Differential ratio | 5.571 | |||
Frame | 232mm same cross section beam | |||
Clutch | Φ395 | |||
Steering gear | Mechanical steering | |||
Suspension system | Non-independent,multiple spring 10/12 | |||
Braking system | Double Route Brake,Spring Brake | |||
Braking system | Spring brake | |||
Tire specification | 10.00R20, 10.00-20 | |||
Alternator | 70A, 150A | |||
Note | Front gas engine Long front Suspension |