LED tunnel light
1)our own mold factory and aluminum die-casting factory provide casings
2)Epistar 45mil
3)CE&ROHS
LED tunnel light
1)our own mold factory and aluminum die-casting factory provide casings
2)Epistar 45mil
3)CE&ROHS
Led tunnel light
YR-TS365-W80: 80w
Material
High-purity aluminum reflector, heat lamps and body shell; 5mm High intensity tempered glass cover; double high-power LED light source; high efficiency constant current source.
Parameter:
| Model number | YR-TS365-W80 | ||
| LED consumptions | 80 W | ||
| System Consumption | 86 W | ||
| LED initial flux | WW | PW | CW |
| 6150 Lm | 6375 Lm | 6225 Lm | |
| Power factor | ≥0.92 | ||
| Total hamornical distortion | ≤15% | ||
| Power efficiency | ≥86% | ||
| Power efficiency | ≥85% | ||
| installation height | 6M | 8M | 10M |
| Average illuminance | ≥31 lux | ≥18.4 lux | ≥12.5 lux |
| Illuminance Area | 10M*10M | 14M*14M | 17M*17M |
| Illuminance Uniformity | ≥0.6 | ||
| Color Rendering Index | WW:Ra≥68; PW/CW:Ra≥75 | ||
| Beam angle | 120 | ||
| Working voltage | DC30-36V | ||
| Input voltage | AC85V-265V | ||
| frequency range | 50Hz--60Hz | ||
| Junction Temperature | ≤80°C | ||
| Working Temperature | “-40°C~+55°C” | ||
| IP Grade | IP65 | ||
| LED Working life-span | ≥50000H | ||
| Certificate | CE,Rohs, | ||
| Packing dimension | 46*34*42.5cm | ||
| Net weight/gross weight | 4kg/4.5kg 2pcs in 1 carton | ||
Applicable to places
Tunnel, underground passage, railways, underground car park, such as the need to place indoor lighting.
Features
1, The use of compositive high-power packaged LED (60W) as light source, the use of unique multi-chip integrated group of single-mode light source design, selection of imported high brightness semiconductor chips with high thermal conductivity, light failure Small, light color purity, no ghosting and so on.
2, The overall tensile aluminum body cooling, the internal LED light source closely connected with the outside and the air convection heat, guarantee the effective life of the LED light sources.
3, High temperature, anti-aging silicone rubber seal, so that body heat, cover, perfect combination of glass, light shell surface and spray the anodic oxidation processing, lighting level of protection IP65.
4, Germany, imported high-purity aluminum reflector cover, effectively improve the reflectivity, and to ensure that the luminous flux output. Targeted to control the LED light the issue of the need for the framework to enhance the lighting effect of the light uniformity and utilization of solar energy. Highlights the obvious energy-saving LED lighting advantage.
5, LED light source does not exist to start the tunnel latency issues, power to work immediately. To solve the traditional lamp to start the long process to achieve a transient start-up and re-start.
6, For a more realistic colors bright. LED tunnel light color-rendering index of up to 80 close to natural light. Vehicles entering the tunnel, the driver can quickly adapt to changes in light color, to ensure the safety of the road.
7, Green non-polluting: the design of cold-light source, no heat radiation, the eyes and skin without any harm, lead, mercury and other pollution elements, to achieve a real sense of the green energy-efficient lighting.
8, Combined with solar energy is an excellent partner, give full play to work with LED low-voltage DC energy saving and environmental protection advantages of solar photovoltaic panels and LED light combination for the customer to achieve the best cost-effective and high reliability.
