Power Management: Support
Support System:: all systems
Interface: IDE SATA
Model: JP203
Power Management: Support
Support System:: all systems
Interface: IDE SATA
Model: JP203
PATA TO SATA interface card provides HDD, ZIP, LS120, MO, CD-ROM or CD-RW IDE interfaces and other hardware into SERIAL ATA interface, transfer rate can be upgraded to second 1.5GB / S. Through this PATA TO SATA interface card, can the original internal CD-ROM drive or burner and turned into an external device.
Product Specifications:
1, standard SERIAL ATA specifications, with mass storage devices (depending on the motherboard may be). Can be used in conjunction with various types of machine for easy installation.
2, hot-swappable, plug and play.
3, transfer rate to 1.5GB / S.
4,supports standard ATAPI, ATA/133, ATA/100, ATA/66, ATA/33.EIDE.
5, Supports standard IDE storage devices (such as Hard Disk, DVD, DVD-RAM, CD-ROM, CD-RW ...)
One 40pin IDE port
One Serial ATA port
One 4pin power connector
Converts Parallel ATA to Serial ATA
Supports ATA 100/133
Compliant with Serial ATA specification
Installation method:
1. Before power off the host computer should be first;
2. Open the computer case, the HW-629 board into the computer motherboard IDE IDE Block Block (IDE interface board);
3. The power line will be equipped with one end connected to the large spare chassis power supply line, one end of a small board in the HW-629 (white transposon, note the direction can not be reversed);
4. To the distribution of the data cable to connect one end of the HW-629 SATA board seat, one end of the SATA devices connected to the SATA interface;
5. Connected after the computer boots into the BIOS for device testing, the host computer should be able to correctly identify the connected IDE devices.
