37m pump truck
37m pump truck
SINOTRUK, CIMC
Pump Truck (Heavy Truck)
37M Pump Truck(mounted concrete pump truck)
37m pump truck
SINOTRUK, CIMC
Pump Truck (Heavy Truck)
37M Pump Truck(mounted concrete pump truck)
Work Condition |
|
Height above sea level | ≤1000m |
Environmental Temperature | 0°40°C |
Parameters |
|
Dead Weight | 27.5×10^3kg |
Max. Load | 29×10^3kg |
Max. Speed | ≤80km/h |
Overall Dimension: length X width X Height | 11700 mm×2495 mm×3920 mm |
Engine System |
|
Engine Type (cylinder/array/oil supply) | In-line 6-cylinder,4 strokes, surcharge intercooling, direct-injection diesel engine |
Engine Model | 6WF1 |
Output Power | 287kW/1800rpm |
Discharge Capacity | 14.256 L |
Max. Torque/speed | 1863Nm/1100rpm |
Tail Gas Discharge Standard | Euro |
Capacity of Oil Tank | 400L(with oil-water separator) |
Chassis Parameters |
|
Chassis Producing Area/ manufacturer /model | Japan/ISUZU Automobile company/CXZ51Q |
Chassis Drive Model | 6×4 |
Power take-off model |
|
Firstly wheelbase | 4595 mm |
Secondly wheelbase | 1310 mm |
Front wheel | 2065 mm |
Back wheel | 1855 mm |
Tyre Type | 295/80R22.5 11.00-20 |
Rim Type | 7.5v×20 12t |
Arm support |
|
Type | Four-section, folding, full hydraulic |
Diameter of delivery pipe | DN125 |
Length of end hose | 3m |
Length of First section | 8700 mm |
Turning angle of First section | 92° |
Length of Second section | 7860 mm |
Turning angle of Second section | 180° |
Length of Third section | 8080 mm |
Turning angle of Third section | 180° |
Length of Fourth section | 8080 mm |
Turning angle of Fourth section | 270° |
Turning angle of revolving table | 365° |
Horizontal length of arm support | 32.6 m |
Vertical length of arm support | 36.6 m |
Lubricating mode | Lubrication with hydraulic oil at lubrication center |
Oil tank capacity | 900 L |
Control | Manual/remote |
Max. water pressure of water pump | 2 MPa |
Cooling method of hydraulic oil | Wind cooling |
Pumping system |
|
Drive mode | Hydraulic type |
Oil cylinder bore X stroke | Φ140 ×2000 mm |
Delivery cylinder bore X stroke | Φ230 ×2000 mm |
Type of valve | S valve |
Theoretical displacement of concrete | Low pressure 120 m3/h |
Theoretical displacement of concrete | High pressure 67m3/h |
Theoretical pumping pressure | High pressure 11.8 MPa |
Theoretical pumping pressure | Low pressure 6.38 MPa |
Theoretical pumping frequency | High pressure 13 times/per minute |
Theoretical pumping frequency | Low pressure 23 times/per minute |
High pressure pumping |
|
Theoretical horizontal distance | 850m/125A pipe |
Theoretical vertical distance | 200m/125A pipe |
Hopper capacity | 0.6 m^3 |
Material feeding height | 1.35 m |
Oil pressure of the system | 32.5 MPa |
Slump | 14 cm~23 cm |
Max. aggregate size | 40 mm |
High-low pressure switch-over | Automatic switch-over |