Welcome to B2BAGE
TSB-4 Rail Line Concrete mixer truck
TSB-4 Rail Line Concrete mixer truck

Minimum Order: 0
Quality/Safety Certification: 0.00


1. used to transport concrete from the mixing plant to the construction
2.durable
3.high efficiency

TS Series rail line type concrete mixing truck, used to transport concrete from the mixing plant to the construction site. Transport in drifting, use battery traction, plus insurance after installation, can slope no greater than 18 degrees inclined heavy vehicles decentralization, empty uphill transport, the need for traction winch. Vehicle throughput TS-4 type is 4m3 (cable car at least 8 tons or more); TS-6 type is 6m3 (at least more than 12 tons of cable car), only Lane loading, unloading. Loading and unloading materials, the mixing tube by the motor drive for positive and negative direction of rotation, are transferred mixing or feed, reverse the material, walking on the way to avoid concrete segregation, when the vehicle is powered by the wheels came towards Mixing Drum Mixing for one-way direction of rotation (according to the direction of the corresponding shift), uniform mixing. The car set a clutch chain protection device, when used for transporting trucks passing, combined with manual clutch, electric motor can not start to protect the motor. When manual clutch disengaged, the motor can be connected to decorative work, need to use water to clean each tank after discharge tube.
      Mixing tube Flashlight tilt cylinder fitted with computer optimized design double helix leaves, mixing even made a clean discharge.
      Mine explosion-proof design of the transport vehicle, with coal for the railway tunnel, defense engineering, hydraulic culvert, underground mines and other Drift (delegated by inclined) of concrete mixing equipment. At the same time there are explosion-proof type.

 

 Model parameter Unit 
 Product model  TSB-2 TSB-4TSB-6  TS6G TSB-8TSB-2A(Low -like)
 Agitation tube capacity M3 3.2 5.2 9 9.5 12 2.7
 Transportation capacity M3 2 4 6 6 8 1.8
 Ex-denning speed M3/min 0.5~0.86 0.5~0.86 0.5~0.86 0.5~0.86 0.5~0.86 0.5~0.86
 Agitation tube rotational speed Ex-denning/agitation r/min 11.7 10~0.8 12.3~0.8 8~8 10~0.8 11.7
 Walks when r/min 2.48(10km/h) 0.8(10km/h) 0.8(10km/h) 2(10km/h) 0.8(10km/h) 2.48(10km/h)
 Gauge mm 600/762/900 600/762/900 600/762/900 762/900 600/762/900 600/762/900
 Isotropil curve radius m 15 20 20 20 20 12
 Biggest release sub-branch slope (°) 18 18 18 18 18 18
 Enters when the ex-denning track grade ‰ 6 6 6 6 6 6
 Maximum running speed km/h 10 15 15 10 15 10
 Through curve, crossing vehicle speed km/h 3 3 3 3 3 3
 Hauling joint way Uses in evenly dark green Draw link
 Uses in the slant hole A hauling links up, two safe suspension hooks
 Remnant rate  ≤5% ≤5% ≤5% ≤5% ≤5% ≤5%
 External dimensions (long * wide * high) mm 5061×1400×1961(Gauge 262) 6000×1500×2213 7082×1650×2637 6610×1600×2800 8000×1600×3200 4522×1400×1850(Gauge 600/762)
5061×1538×1971(Gauge 900)4522×1538×1850(Gauge 900)
 Dead weight T 4.7(Gauge 600/762) 6.9 9 9.6 11 4.1(Gauge 600/762)
4.8(Gauge 900)4.2(Gauge 900)
 Discharge port altitude mm 1350 1440 1450 1430 1500 1170
 Feed head altitude mm 1964 2160 2585 2740 3000 1800
 Feeds half size mm 630×686 630×686 630×800 710×870 630×800 595×750
 Spread of axies mm 1953 2850 3200 2600 3200 1350
 Mixing blade Logarithm double helix leaf blade

 

 

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.