control cable can be produced according to the standard GB9330-2008, and the factory can also manufacture the cable with others.

PLASTIC INSULATED CONTROL CABLE

Characteristics and Applications of the Products

Plastic insulated control cables is used to connect electrical equipments. It applies to controlling, monitoring and protective system with A.C. rated voltage U0/U up to and including 450/750V.

 

The main features of the flame retardant PVC control cable is hard to get fire or that the continuous burning of cables is very limited when it is on fire. It applies to the places to the places with special demands of flame retardant property.

 

Fire-resisitance cable can operate normally for some time when it is burning except that it can transmit electrical power under normal condition. It is used in the places necessary to resist fire.

 

Standards of the products

The cable is manufactured in accordance with the standards of GB9330-88. It can also be produced according to special requirements put forward by clients.

Besides the standards mentioned above, the flame retardant property of the flame retardant cable must meet the corresponding demands of class A,B or C which is stipulated in GB/T 19666-2005 Amongst the 3 class, class A is best, while C worst. Clients can select any type of cable as practical needs.

Fire-resistance property of the fire-resistance cable can be GB/T 19216.21-2003

 

Type

KVV KVVP2 KVV22 KVVP2-22 KVVR

 

Application and Specification

Rated voltage U0/U is 450/750VPermissible continuous working temperature of cable conductor is 70°c.Ambient temperature is not lower than 0°c and its minimum bending radius is as follows when cable is installed:

For non-armored cable – not less than 6 D

For armored or copper tape shielded cable – not less than 12 D.