Bucket elevator:
1,Belt type
2,Used in food, coke, stone,chemical lines
3,Model:TD100,TD130,TD160,TD250,TD315,TD400,TD500,etc
Use
D/TD type belt bucket elevator produced by my factory upgrade machine are composed by movement part (hopper and traction tape), upper section with drive drum, lower section with pulled tight drum, middle machine shell, driven device and check brakes, applies for upward conveying powder, and bulk shaped material of granular small block of no mill cut or half mill cut as coal, sand, coke, cement and water ore,.
Feature of this machine is fast-centrifugal discharging and used rubber conveyor belts as traction component which is not suitable for transporting large abrasion and dig resistance materials. Temperature of conveying material shall not exceed 60 degrees, but allowed 150 degrees if using heat-resistant rubber belt.
The machine consists of four specifications: D160, D250, D350 and D450.
Transmission capacity of this machine is 3.1-66m³/h and 4-30m in height. In order to meet a variety of application requirements, this machine has a different system of making methods and installation method
Technical Parameters:
Item | Hoist model | |||||||
D160 | D250 | D350 | D450 | |||||
S Method | Q Method | S Method | Q Method | S Method | Q Method | S Method | Q Method | |
Delivery capacity (m3/ h) | 8 | 3.1 | 21.6 | 11.8 | 42 | 25 | 69.5 | 48 |
Hopper capacity(L) | 1.1 | 0.65 | 3.2 | 2.6 | 7.8 | 7 | 15 | 14.5 |
Bucket pitch(mm) | 300 | 300 | 400 | 400 | 500 | 500 | 640 | 640 |
Weight belt with hopper(kg/m) | 4.72 | 8.8 | 10.2 | 9.4 | 12.1 | 12.1 | 21..3 | 21..3 |
Convey Belt: Width(mm) | 200 | 300 | 400 | 500 | ||||
Convey belt :Layers | 4 | 4 | 5 | 5 | ||||
Hopper movement speed(m/s) | 1 | 1.25 | 1.25 | 1.25 | ||||
Transmission speed of the roller shaft(r/min) | 47.5 | 47.5 | 47.5 | 37.5 | ||||
Materials degree of maximum block(mm) | 25 | 35 | 45 | 55 |
Key:If you enter, please don't hesitate to send us your enquiry including material, capacity, chain or belt bucket elevator, quantity, voltage, power, frequency and then we will make the best quotation for you.