single beam overhead crane
1)capacity :1 -20 tons.
2)span:7.5m-31.5m.
3)working grade:A3-A5
4)High load handling capacit
LDA Model Single Beam Overhead Crane
LDA Model Single Beam Overhead Crane is characterized by more reasonable structure and higher strength steel as a whole. Used together with CD1 model,MD1 model electric hoist as a complete set, it is light duty crane with a capacity of 1 to 20 tons. The span is 7.5-31.5M. Working grade is A3-A5. Working temperature is -25°C to -40°C.
This products has two operational methods,ground or operational room which has open model and closed model, and can be installed on left or right side according to the practical situation. And the direction of entering the gate has two forms, sideway and ends in order to meet the users' needs,choice under different conditions.
Environment
1.Power source is three-phase alternating current,rated frequency is 50Hz, rated Voltage is 380V.
2.The altitude height of site is ought to be less than 2000M.
3.Flammable,explosive and corrosive gas are forbidden in the work environment.
4.The crane is forbidden to lift fuse and blend deleterious article and flammable explosive article.
Safety
Overload protection,
Main lifting motor with thermal protection,
Crane switch and travel end switch,
Emergency switch can stop all movement when any dangerous happened,
Sub-assemblies characteristic are tested before assemly.
All cranes must be pre-assmebled and tested before leaving factory and offer the certification of test.
Advantage:
1). Compact design, optimal use of the size of work areas
2). Control the load easily and position the load exactly
3). Superior safety and reliability
4). Minimum& Easy maintenance
5). “One-Stop Shop” for your crane and hoist needs
Transportation:
