QTZ80 hydraulic crane:
Independent height:45m
Load capacity:6t,Tip load:1.3t
Boom lengh:60m/55m/50m
Max height:200m
Our QTZ80(TC6013) hydraulic crane has merits as follows:
1, According to customers' requirement it has stationary and adhered two types, the lifting height of the basic stationary one is 45m,the tower crane can be adhered and jacking to as high as 200m.
2,Factory made long boom is 60m, and can reassembled to 55m and 50m.
3,Hoisting mechanism : three-speed motor,reducing mechanism, rational performance
4, The slewing mechanism : planet gear speed reducer ,fluid coupling ,slewing brake device
steady starting, accurate position, compact structure.
5,The trolley tracting mechanism:planet gear speed reducer ,two-speed motor driving ,
6, New moment limiter which is outside adjustable, make the adjusting easy and safe ,
can be governed by a special person after adjusting
7,Cabin:developed on the basis of the human engineering principle.
8,Full set of safety protection equipments:weight limiter, moment limiter, luffing limiter, height limitater, and slewing limiter ,trolley rope-off protection, trolley spindle-break protection,pulley anti-skipping rope devices ,labor protective devices like rest platform and guardrail and so on.
Technical Characteristics of QTZ63(TC6013) | |||||
Working condition/m | Min 2.2 | Max 60 | |||
Hoisting height/m | stationary | anchorages | |||
45 | 200 | ||||
Max hoisting load / t | 6 | ||||
Hoisting YZTD225L/24KW | a=2 | a=4 | |||
t | m/min | t | m/min | ||
3 | 0-40 | 6 | 0-20 | ||
1.5 | 0-80 | 3 | 0-40 | ||
Trolleying | m/min | 40/20 | |||
KW | 3.3/2.2 | ||||
Slewing | r/min | 0~0.6 | |||
KW | 3.7*2 | ||||
Power | 380V 50HZ | ||||
| In service | Out of service | |||
Reaction F1 | 98t | 132t | |||
Reaction F2 | 72t | 102t |