1.The best crusher for breaking stone.
2.Flexible maneuverability.
3.Stone Crusher Form 50-1000t/h.
4.ISO9001:2000
Brief introduction
Stone Jaw Crusher is widely used to crush various large stones, limestone, granite, basalt, river gravel, etc. Jaw crusher 's highest antipressure strength of material to be crushed is 320MPa. The jaw crusher is mainly used to crush hard and medium hard stones in stone mining, metallurgy industry, building material, highway, railway, chemical industry, etc.
Working Principle
The motor drives pulley of jaw crusher, making the movable jaw do periodic movement through eccentric shaft. The angle between toggle plate and movable jaw increases when movable jaw moves up. So the movable jaw moves to the fixed jaw. The stones are crushed in this process in jaw crusher. The angle between toggle plate and movable jaw decreases when movable jaw moves down, the movable jaw moves away from fixed jaw by the pulling of rod and spring, the crushed stones are discharged from the outlet.
Advantage
High ratio of crushing of jaw crusher ;Homogeneous final product size of jaw crusher; Simple structure of jaw crusher ;Reliable working condition of jaw crusher ;Easy maintenance of jaw crusher ;Low operating cost of jaw crusher ;Little noise and dust of jaw crusher ;Safe and reliable lubrication of jaw crusher.
Jaw Crusher Specification:
Model
Feeding inlet
size(mm)
Max inlet
size(mm)
Adjustable Outlet size ( mm)
Capacity
(t/h)
PE-150×250
150×250
125
10- 40
1-3
PE-250×400
250×400
210
20-60
5-20
PE-250×750
250×750
210
25-60
13-35
PE-250×1000
250×1000
210
25-60
15-52
PE-250×1200
250×1200
210
25-60
20-60
PE-400×600
400×600
340
40-100
15-60
PE-600×900
600×900
500
65-160
60-200
PE-900×1200
900×1200
750
95-165
220-450
PE-1000×1200
1000×1200
850
195-265
315-500
PE-1200×1500
1200×1500
1020
150-300
400-800
Note: This specification is for reference, any changes are subject to the products.