CS cone crusher from Shunky
1.Hydraulic clearing;
2.Hydraulic Adjustment;
3.Heavy Duty Design;
4.High Productivity;
Shunky cone crushers are generally used as a secondary crusher in a crushing plant. Pre-crushed material is fed through the top of the cone crusher and flows over the mantle. The vertical
cone crusher drive shaft rotates the mantle eccentrically below the concave, or bowl liner, squeezing
the product and crushing it between the mantle and concave. Cone crushers are usually run on belt
drives driven by an electric motor or diesel engine. It is used extensively throughout the aggregate
and mineral processing industry.
Main Technical Data
Short Head
Model | Dia. mm (inch) | Cavity | Feed Opeing | Outlet Setting (mm) | Shaft Speed (r/min) | Power (kw) | Capacity (t/hour) | Weight (t) | Dimension (mm) | |
Closing Side (mm) | Open Side (mm) | |||||||||
CSD75 | 914 (3') | Fine | 13 | 41 | 3-13 | 580 | 75 | 27-90 | 15 | 2821×1880×2410 |
Coarse | 33 | 60 | 3-16 | 27-100 | ||||||
CSD110 | 1218 (4') | Fine | 29 | 57 | 5-16 | 485 | 110 | 50-132 | 20 | 2560×1942×2928 |
Medium | 44 | 73 | 10-16 | 90-145 | ||||||
Coarse | 56 | 89 | 13-19 | 141-181 | ||||||
CSD160 | 1295 (4 1/4') | Fine | 29 | 64 | 3-16 | 485 | 160 | 36-163 | 27 | 2800×2342×2668 |
Medium | 54 | 89 | 6-16 | 82-163 | ||||||
Coarse | 70 | 105 | 10-25 | 109-227 | ||||||
CSD220 | 1676 (5 1/2') | Fine | 35 | 70 | 5-13 | 485 | 220 | 90-209 | 55 | 3917×2870×3771 |
Medium | 54 | 89 | 6-19 | 136-281 | ||||||
Coarse | 98 | 133 | 10-25 | 190-336 | ||||||
CSD315 | 2134 (7') | Fine | 51 | 105 | 5-16 | 435 | 315 | 190-408 | 110 | 4130×3251×4454 |
Medium | 95 | 133 | 10-19 | 354-508 | ||||||
Coarse | 127 | 178 | 13-25 | 454-599 |