1.Transmission mode:Axis transmission
2.Less fuel consumption
3.Has national patent
4.Long life and easy maintaining
specifications for the products
1.Engine
Model | QL168F |
Type | (Air-cooled;4-stroke;OHV;single) |
Maximum Power Output | (5.5HP)4.1KW |
Rated Power Output | (4.0HP)3.0KW |
Maximum Torque | 10.8N.m |
Ignition System | Transistor magneto |
Starting System | Recoil/Electric |
Engine Oil System Capacity | 0.6Liters |
Fuel Capacity | 3.6Liters |
Min.Fuel Consumption | 360g/kw/h |
2.Tiller
Rated Productivity(h*m*m/h) | 0.053-0.099 |
Tilling depth(cm) | 8--30 |
Tilling width(cm) | 75--105 |
Fuel consumption(kg/h) | ≤1.3 kg/h |
Connection mode | Direct connection |
Transmission mode | Axis transmission |
Running speed(fast gear)(km/h) | 10 |
Running speed(slow gear)(km/h) | 5 |
Tilling speed(Rotary tillage)(km/h) | 0.5-1.3 |
Reverse speed(km/h) | 2 |
N.w(standard)(kg) | 82 |
Gearbox oil capacity(L) | 2.4 |
3.Rotary Blade Specification
Rotary speed(r/min) | 150 |
Max radius of gyration(mm) | 180 |
Total installed blades | 24 |
Number of cutting face in gyration | 8 |
Blades per cut | 3 |
Distance between two cutting face(mm) | 150 |
Diameter of ratary blade(cm) | 36 |
4.Packing
Packing dimension(L×W×H)(mm) | 1110×500×800 |
Qty/20Ft container(sets) | 54-58 |
Qty/40Ft container(sets) | 118-121 |
5.Use of the Product
(1)Rotary tillage: based on the normal tiller machine, a rotary tiller was added to both side to it, and fixed by 2 M8x55 stud shafts.
Rotary tillage machine mode | Four groups | Five groups | ||
3 blades | 4 blades | 3 blades | 4 blades | |
Number of Rotary blade | 3×8 | 4×8 | 3×10 | 4×10 |
Width of rotary tillage | 1200 | |||
Adaption to land and soil | paddy field which has no sufficient water,High sticky soil | Hard soil | Wet soil after rains | Dry soil or long-stalked crops,long distance |
(2)short distance transportation:Put the front arm into transport trail car. Meanwhile add wheels to power drive shaft for running. The rated load capacity is 250kg. When the engine is running at rated speed, this machine could travel 10 km/hour at fast gear and 5kg/hour at slow gear.
(3)Tilling:Uninstall the speed adjustor and install tiller; then adjust the height and width of tiller to a suitable position. After them, tilling could be begun.
(4)Multi-function:Uninstall the safety cover of gear, and pick out the bolt from back of principal axis; put a matched belt pulley or clutch onto it and fixed by bolts. The pulley slot use ordinary A type V-belt. The rated rotating speed of pulley is 3000rpm. When it’s connected to relevant machines or tools, it could perform pumping, irrigating, spraying and threshing functions.
6.Attachment to the machine
Attachment | Name | Use |
Standard attachment | one body machine | |
one rotary blade for dry land | rotary tillage for dry land | |
one running wheels | walk | |
attachment of machine | rotary tillage wheel | rotary tillage for paddy land |
pump machine(3 or 4 inch centrifugal pump) | pump | |
tilling machine | tilling | |
2 piece compound blade | application in wet land with grass | |
2 piece compound blade | application in wet land with grass |
If you want other rotary tiller blades,you could go to our homepage: http://cqqinglong.en.alibaba.com/ in the Rotary Cultivator Blades column to choose the blades satisfy you.