Cylindrical Roller bearing
1 ) NJ TYPE M.O.Q: 50 PCS
2 ) ISO 9001:2008
3 ) Material: GCr15
4 ) Havestock to supply
Introduction of cylindrical roller bearings |
Cylindrical roller bearings mostly consist of the cage, the rollers and guided by two capped edges on a ring. It is a separable bearing, convenient for it's assembly and disassembly especially it has the advantages in a condition that the interference is required and assorted with inner ring, outer ring and housing. The bearing of this type can normally take the radial load, on the other hand, single row cylindrical roller bearing with ribbed inner ring and ribbed outer ring can take smaller axial load or intermittent axial load. The structure of the bearing showing that it runs very well under high rotational speed. |
Cylindrical roller bearings with capped edge on both outer ring and inner |
The NJ cylindrical roller bearing has double capped edge on outer ring and single capped edge on inner ring. |
Cylindrical roller bearings with full complement (rollers) |
Using double capped edges on the outer ring and single capped edges on the inner ring. i.e. type of NJ.V, NUP.V, RNU.V, etc. It has the advantage of great load rating and simple structure in comparison with the roller bearing which has the similar structure and has cage. In condition that rotation speed and working temperature is not high, good lubrication condition and the cleanliness of the bearing box is also relatively good then it has the first priority to use of the full complement (rollers) structure. |
Full complement cylindrical roller bearing |
The dimensions of E type cylindrical roller bearing are same as the dimensions of the ordinary type. But the load carrying capacity is increased accordingly due to the increasing of the diameter of rollers, the length and the number of rollers. |
Cylindrical roller bearings Suffix |
C3–Radial internal clearance larger than normal |
Angular contact ball brearing
High speed precision bearing
Thrust angular contact ball brearing
Double direction thrust angular contact ball bearing