TIMKEN is the world's integrated manufacturer of precision machinery
Thrust ball bearings Introduction
Bearings for the separable structure, so installation is simple, because the washers and ball and cage assembly can be installed separately. Thrust ball bearings from a shaft washer, two bearing rings, and two ball and cage thrust assemblies formed. Bearings are separable, so installation is simple. Each part can be installed separately. Bearing race and ball and cage assemblies and one-way bearings are the same.
Thrust ball bearing is a separation of bearings, shaft washer, housing washer can be cage, ball component separation. Compatible with the shaft axis of the ring ring, seat ring is compatible with the ring bearing hole, and the gap between shaft. According to their structure is divided into one-way thrust ball and thrust ball bearings.
One-way thrust ball bearings can withstand axial load in one direction, two-way thrust ball bearings can withstand axial load in both directions. They all can not bear radial load. One-way thrust ball bearings from a shaft washer, a bearing race, and a ball and cage thrust assemblies formed.
Thrust ball bearings can withstand axial load in both directions, can be two-way fixed crankshaft. Such bearings must not be exposed to any radial load. Thrust ball bearings with a seat structure as well, due to appear before the installation of seat spherical shape, it has a self-aligning bearing performance reduces installation errors. Thrust ball bearings are mainly used in automotive, machine tools and so on.
TIMKEN bearing guide professional to provide you EE192150/192200 TIMKEN tapered roller bearings, while providing you TIMKEN tapered roller bearings EE192150/192200 TIMKEN pictures sizes prices and other relevant information. EE192150/192200 TIMKEN bearings from your model of confirmation to your order right after the installation and maintenance EE192150/192200 TIMKEN, we will provide you with the most professional service!
If you have demand, we also provide you with TIMKEN tapered roller bearings EE192150/192200 TIMKEN brand alternative, and satisfy your demand for the use of EE192150/192200!
EE192150/192200 TIMKEN tapered roller bearings Dimensions:
ID 381.000mm 63.500mm OD 508.000mm thickness
EE192150/192200 TIMKEN tapered roller bearings Description:
TIMKEN tapered roller bearing OD 508.000mm 381.000mm ID thickness 63.500mm
EE192150/192200 TIMKEN tapered roller bearings detailed technical parameters:
EE192150/192200
Prefix letters are 1-2 letters, used to represent the design level of the bearing condition
EL: Ultra-Light HM: the heavy
LL: Add Light H: Heavy
L: Light HH: Type add
LM: the light EH: super-heavy
M: Medium T: thrust bearing
TIMKEN bearing installation, adjustment and removal method
Installation
A cooling method, using liquid nitrogen to the object (axis) after cooling, then the assembly
2 heating method, using bearing heater (bearing), not to exceed 180 °, re-assembly.
Adjustment
What an axial gasket repair
2 Adjust the amount of bearing preload
3 the use of axial adjustment nut
Disassembly
1 with Tonggun
2 Use the pull claw
Timken (timken) thrust bearing is a ball rolling with a washer-shaped ring raceway and the ball cage assembly of the components.
Installed in the shaft of the ring is called the axis of ring ring on the installation is called the ferrule seat, two-way bearing installed in the shaft will be used in the ring. Thrust ball bearings are separable bearings, bearing only to the load. One-way bearings can only carry axial load in one direction, two-way bearings can bear both directions alternating axial load. Thrust ball bearings in the work must be axial preload. They are mainly applied to machine tool spindles, automobile clutches, reducers and so on. Two-way thrust angular contact ball bearings for machine tool spindles, one-way thrust angular contact ball bearings for screw support. Thrust ball bearings can not restrict the radial movement shaft or housing, but may limit the shaft and the shell axial movement in one direction, therefore, such bearings are usually used in conjunction with the deep groove ball bearings. Installation, shaft and housing must remain concentric axis of the hole, otherwise it will cause the stress concentration premature bearing damage. In order to eliminate this undesirable phenomenon can be present between the ring diameter and the shell holes left 0.5 ~ 1mm of the radial clearance. Shaft centerline and housing should ensure that the vertical bearing surface, tilted axis and the deflection is not allowed, otherwise will cause uneven distribution of the load bearing prematurely. To eliminate the bearing axis tilt, can be present on the pad ring of the bearing surface of a flexible material, such as oil and rubber, leather, or the use of spherical seat thrust ball bearings.
Thrust ball bearings generally use steel stamping cage; when the diameter ≥ 250mm, the use of solid cage.
Cylindrical roller bearing TIMKEN
TIMKEN cylindrical roller bearings designed for high radial loads, or even accompanied by eccentric, improper lubrication, there are impurities, speed high or very high stress environment.
Compared to other forms of roller bearings, cylindrical roller bearing can carry radial load up with three basic types, to satisfy various application requirements.
Single row cylindrical roller bearing TIMKEN
Single row cylindrical roller bearing with cage with six different designs, a variety of inside and outside the ring configurations to meet different application requirements.
Double row cylindrical roller bearing TIMKEN
Double row cylindrical bearings than traditional single row bearings with higher radial load capacity.
Four-row cylindrical roller bearing TIMKEN
Four-row cylindrical roller bearing high radial load capacity, but no thrust load capacity. Most of the type of bearings used in metal rolling industry roll neck applications.
The Timken Company 2009 global sales of 3.1 billion U.S. dollars, in 26 countries and regions, operations with approximately 17,000 employees, is your best choice to improve performance. 1895, TIMKEN, founder of The Timken Company, Mr. Henry Timken axle was invented a conical roller bearings used, that is, tapered roller bearings (Tapered Roller Bearings), the company which was established. Whether in China or around the world, with 110 years of development history of Timken bearings, power transmission and special alloy steel products, R & D and production technology are always at the forefront of innovation and energy efficient. The Timken Company's high quality products and solutions are widely used in many industries, helping to clean the mechanical parts of the world energy ..
