Automotive Sensor Simulator & Tester SV71
Measure the signals of automotive sensors Allow simulation of most sensorand comput
Automotive Sensor Simulator & Tester SV71
Overview
Features | ||
Measure the signals of automotive sensors | ||
| · | The most complete hand held diagnostic tester for sensors,wiring,connectors |
and on-board computers | ||
DC voltage,lambda,frequency and pulse signals can be measured | ||
· | Digital display shows actual output of signals | |
· | Measures any voltage AC or DC,resistance or frequency output | |
Allows Simulation of most Sensor and computer managemeng omponents | ||
| · | Simulating temperature sensors,throttle potentiometers,switches,air |
|
| flow meters and lembda/oxygen srnsors |
| · | Features AC voltage output to simulate vehicle speed sensors(vss), |
|
| CAM,CRANK,and ignition reluctors |
| · | Simulates actual working condition of any sensor without having to remove it |
|
| from the vehicleA.B.S.,Crank,Can,Coolant,Oxygen,MAP,MAF,MAT,VSS,etc |
Cheeks basic ECU operation | ||
| · | Controlling the signals being produced allows you to check ECU response and |
|
| operation.This prevents mis-diagnosis where the fault may lie in the ECU itself |
|
| or in the wiring between the component and the ECU.Works independently or with |
|
| any scan tool ever made |
Can be used on any domestic or import vehicle | ||
Eliminates unnecessary replacement of non-defective sensors | ||
Can drive computer into"open or closed loop." |
SPECIFCATIONS | ||
Simulate Signal | Range | Function |
DC Voltage | 0-1V | Simulating lambda/oxygen sensors |
0-5V | Simulating DC signal of sensors | |
0-12V | ||
Resistance | 0-5K | Simulating temperature or resistance sensors |
0-200K | ||
Frequency SignalV/Duty/Hz | 0-5v 10-90% 10-4KHz | Simulating frequency signal sensors |
0-12V 10-90% 10-4KHz | ||
| ||
Test Function | Range | Basic Accuracy |
DC Voltage | 400mV,4v ,40v,400v,1000v | ±(0.5%+3d) |
AC Voltage | 400mV,4v ,40v,400v,750v | ±(0.8%+3d) |
DC Current | 40mA,400mA,10A | ±(1.2%+3d) |
AC Current | 40mA,400mA,10A | ±(1.5%+3d) |
Resistance(Ω) | 400,4K,40K,400K,4M,40M | ±(1.0%+3d) |
Capacitance | 40nF,400nF,4μF,40μF,100μF | ±(5.0%+3d) |
Frequency | 10Hz-10MHz | ±(0.5%+3d) |
Duty cycle | 0.1%-99.9% | ±(2.0%+3d) |
Diode test and Audible Continuity test |
| Test current:1±0.6mA |
| >60Ω Buzzer sounds |