Recessed LED Lighting Fixtures parameters:
Driver Input Voltage: 120V AC
Light Source: 1 x 1 W high power LED
Recessed LED Light suitable for under-cabinet, display and showcase lighting.
Uses only 2 Watt and generates very little heat Adjustable light beam without IR and UV rays Two years warrantyRecessed LED Lighting Fixtures parameters:
Driver Input Voltage: 120V AC
Light Source: 1 x 1 W high power LED
Total Power Consumption LED Recessed Light and Driver: 2 W
Halogen equivalent: 10 W
Beam Angle: 60°
Available Light Colours: Daylight White 6,000K, Warm White 3,000K
Luminous Flux: Daylight 80 lm, Warm White 60 lm
Rated Life: 30,000 hours
Dimensions: trim diameter 52 mm; mounting hole diameter 42-47 mm; height 18 mm
Aluminum body and trim, clear plastic lens.
LED Downlight low brightness model with one high-power Light-Emitting Diode that produces pleasant light without heat and UV rays. Beam direction can be adjusted 15° each way. Included is external UL certified LED driver.
Recessed LED Light installation instructions:
Drill holes with 42 to 47 mm diameter in the mounting surface. Plug the Recessed LED Lighting Fixtures into the holes while holding the retaining springs in upright position. Connect the LED lights to the drivers with the plug-in connectors. Drivers should be hard wired to line voltage. Depending where you want the drivers to be placed, you can extend the line voltage cables to the drivers or the low voltage cables between the drivers and the lighting fixtures.
Do not install the Recessed LED Light at directly exposed to water locations.
