Crawler drilling rig
1:Cummins Engine
2:high drilling efficiency
3:ISO Certificated drilling rig
4:drilling depth:40-200m
DTH Drilling rig INTRODUCTION | |||
HD300 crawler deep hole diameter adopts diesel motor,hudraulic oil pump unit offers power to hydraulic motor moving,turn-ground,propulsion and lifting,and angle orientation of oil cylinder,etc.When the drill is working,only the down the hole hammer consume the compressed air.The drill is used for watr well,geothermic air-conditioner drilling operation and various stonework blasting hole operation,the drill can also realize the process such as breast wall drilling with casing following,conduct drilling grouting hole of the hydropower cofferdam,grouting hole for dyke seepage control and grouting hole for base enforcement and anchor hole. | |||
SPECIFICATION | |||
1 | Rock Hardness | F=6-20 | |
2 | Hole Diameter | mm | 90-230 |
3 | Hole Depth | m | 40-200 |
4 | Rotation Torque | Nm | 4000 |
5 | Rotation Speed | rpm | 0-80 |
6 | Max. Feed force | KN | 30 |
7 | Max. Lifting force | Kgf | 6000 |
8 | Max. Feed Speed | M/min | 15 |
9 | Max. Lifting Speed | M/min | 15 |
10 | Max Swing of Boom | ° | 45° left / 45° right |
11 | Max Dump of Boom | ° | up60 down20 |
12 | Max Swing of Guide | ° | 30(L) / 91(R) |
13 | Max Dump of Guide | ° | 180 |
14 | Guide Extension | mm | 1200 |
15 | Feed Stroke | m | 3 |
16 | Manufacturer |
| CUMMINS |
17 | Air Compressor | M³/min | 11-25 |
18 | Compressor Pressure Required | Mpa | 1.2-2.4 |
19 | Max. Travel Speed | Km/h | 2 |
20 | Net Weight | kg | 6200 |
21 | Shipping Length | mm | 6900 |
22 | Shipping Width | mm | 2200 |
23 | Shipping Height | mm | 2200 |