Reasonable structure
High efficiency,low energy consumption
Convenient transportation
Convenient and reliable operation
Limestone dryer
This machine can dry various kind of materials which contain moisture, such as coal, coal slurry, slag, industrial waste, and clay stone
Widely used in building materials, metallurgy, and chemical industry
Working principle of limestone dryer:
Material to be dried enters the dryer and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer, when the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls
This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow) or toward the feed end from the discharge end (known as counter-current flow)
The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer, alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated, when the gas stream is preheated by some means where burner combustion gases do not enter the dryer, the dryer known as an indirect-heated type, often, indirect heated dryers are used when product contamination is concern
Features of limestone dryer:
Reasonable structure
High efficiency and low energy consumption
Convenient transportation
Convenient and reliable operation
Specifications of Limestone dryer
Specifications (m) | Diameter of rotary body | Length of rotary body | Angle of slope | Weight | Inlet temperature () | Capacity |
GZφ600×6000 | φ600 | 6 | 3 | 2.9 | ≤700 | 0.5-1.5 |
GZφ800×8000 | φ800 | 8 | 5 | 3.5 | ≤700 | 0.8-2.0 |
GZφ1000×9000 | φ1000 | 9 | 5 | 5.2 | ≤700 | 0.8-2.5 |
GZφ1000×10000 | φ1100 | 10 | 5-3 | 5.6 | ≤700 | 1.0-3.5 |
GZφ1200×10000 | φ1200 | 10 | 3-5 | 14.04 | ≤700 | 1.8-5 |
GZφ1200×12000 | φ1200 | 12 | 3-5 | 14.8 | ≤700 | 2-6 |
GZφ1500×12000 | φ1500 | 12 | 3-5 | 17.76 | ≤800 | 3.3-7.5 |
GZφ1800×14000 | φ1800 | 14 | 3-5 | 29 | ≤800 | 5-9 |
GZφ2200×12000 | φ2200 | 12 | 3-5 | 33 | ≤700 | 6-12 |
GZφ2200×18000 | φ2200 | 18 | 3-5 | 53.3 | ≤800 | 10-15 |
GZφ2200×20000 | φ2200 | 20 | 3-5 | 56 | ≤800 | 15-25 |
GZφ3000×20000 | Φ3000 | 20 | 3-5 | 78 | ≤800 | 25 |
GZφ3000×25000 | Φ3000 | 25 | 3-5 | 104.9 | ≤800 | 32-36 |