Sand Rotary Dryer
1.Accurate Temperature Control
2.Natural Gas Heat Source Available
3.Screw Feeding Device Available
Best Selling Competitive Price Sand Rotary Dryer
Sand Rotary Dryer is a type of industrial dryer employed to reduce or minimize the liquid moisture content of the material it is handling by bringing it into direct contact with a heated gas. The dryer is made up of a large, rotating cylindrical tube, usually supported by concrete columns or steel beams. The dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under gravity. Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls.
Specifications
Model | Diameter (MM) | Length (M) | Slope ( °) | Speed (R / Min) | Power (Kw) | Volume ( M3) |
0.6 * 8 - 12 | 600 MM | 8 - 12 M | 3-5 | 8 | 4 | 2.26 |
0.8 *10 -12 | 800 MM | 10 - 12 M | 3-5 | 7.2 | 4 | 5.02 |
1.0 *10 - 12 | 1,000 MM | 10 - 12 M | 3-5 | 6.73 | 5.5 | 7.85 |
1.2 *10 - 18 | 1,200 MM | 10 - 18 M | 3-5 | 5.8 | 11 - 15 | 13.31 |
1.5 *12 - 18 | 1,500 MM | 12 - 18 M | 3-5 | 4.8 | 15 - 22 | 21.2 |
1.8 *12 - 18 | 1,800 MM | 12 - 18 M | 3-5 | 3.2 | 18 - 30 | 48.22 |
2.2 *12 - 22 | 2,200 MM | 12 - 22 M | 3-5 | 3 | 22 - 30 | 70.43 |
2.8* 15 - 24 | 2,800 MM | 15 - 24 M | 3-5 | 2.59 | 30 - 55 | 147.8 |
Feeding Part : Screw Feeding Device - This device can feed the materials into the tube smoothly, so the raw materials , like sawdust can not be stuck in the feeding port.
Inside of Body