productivity:3.8~106NM3/h
dew point:-40~60
inlet temperature: 40
working cycle: 10~20min
working pressure: 0.6~0.8MPa
Specifications:
Capacity: 3.8 ~ 106 NM3 / hr
Dew Point: - 40 ~ - 60 Degree Celsius
Inlet Temperature: 40 Degree Celsius
Working Cycle: 10 ~ 20 min
Working Pressure: 0.6 ~ 0.8 MPa
No-heat regeneration dryer is according to pressure swing adsorption principle. With the method of countercurrent no-heat regeneration, the dust and the water in the compression air are been moved and the air is been dryed, so we get the clear and dry air.
Because it is easily to operate ,convenient to maintenance, Low energy-consuming and long life to be used,ect. It is widely used in petroleum, chemical industry, light and textile industry, textile, power, instrument, medical, transportation, power meters and pneumatic components, etc.
specifications | The rated capacity | work pressure | inlet temperature | Dew point
| Regeneration gas loss | Working cycle | Envelop dimensions |
No-heat W1ZG-3/8 | 3.8NM³/h | 0.6~0.8MPa | ≤40°c | ≤40~60°c | 12% | 10-20min | 700mm*500mm*1650mm |
No-heat W1ZG-6/8 | 6.5NM³/h | 0.6~0.8MPa | ≤40°c | ≤40~60°c | 12% | 10-20min | 900mm*740mm*1850mm |
No-heat W1ZG-10/8 | 10.8NM³/h | 0.6~0.8MPa | ≤40°c | ≤40~60°c | 12% | 10-20min | 1350mm*1000mm*2000mm |
No-heat W1ZG-20/8 | 23NM³/h | 0.6~0.8MPa | ≤40°c | ≤40~60°c | 12% | 10-20min | 1550mm*1150mm*2100mm |
No-heat W1ZG-30/8 | 33NM³/h | 0.6~0.8MPa | ≤40°c | ≤40~60°c | 12% | 10-20min | 1720mm*1200mm*2250mm |
No-heat W1ZG-40/8 | 45NM³/h | 0.6~0.8MPa | ≤40°c | ≤40~60°c | 12% | 10-20min | 1820mm*1250mm*2520mm |
No-heat W1ZG-60/8 | 65NM³/h | 0.6~0.8MPa | ≤40°c | ≤40~60°c | 12% | 10-20min | 1950mm*1360mm*2700mm |
No-heat W1ZG-80/8 | 85NM³/h | 0.6~0.8MPa | ≤40°c | ≤40~60°c | 12% | 10-20min | 2200mm*1500mm*2800mm |
No-heat W1ZG-100/8 | 106NM³/h | 0.6~0.8MPa | ≤40°c | ≤40~60°c | 12% | 10-20min | 2500mm*1650mm*2900mm |