1.Application: thermal sensitive material
2.Comply with GMP
3.Save heat exchange area of evaporator
Application:
Thermal sensitive material that is easy to decompose, polymerize or denature.
Widly used in pharmaceutical, chemical, foodstuff and electronical industries
Heat Source:
low pressure steam or waster heat steam (water or oil designed as required)
Principle:
It is well known that vacuum dryer is to put raw material to the state of vacuum for heating and drying.It will increase impetus for heat and mass exchange. Therefore for certain heat exchange amount, it can save heat exhange area of evaporator
Features:
1.Disinfection before dryer. During the period of dryer, any impurity cannot be mixed into it.
2. Static vacuum dryer, material to be dried cannot be damaged.
3.Under the condition of vacuum, the boiling point of material solution will be reduce.
Technical Data:
Specification | YZG-600 | YZG-1000 | YZG-1400 |
(mm) Inner size of drying chamber | φ600X976 | φ1000X1527 | φ1400X2054 |
(mm) Outer size of drying chamber | 1135X810X1020 | 1692X1190X1500 | 2386X1675X1920 |
Layer amount of baking frame | 4 | 6 | 8 |
(mm) Distance between layers | 81 | 102 | 102 |
(mm) Size of baking disk | 310X600X45 | 460X640X45 | 460X640X45 |
Qty of baking disk | 4 | 12 | 32 |
Pressure used in pipe of baking disk | <=0.784(8kg/cm) | 0.784 | <= 0.784 |
Top baking frame to be used | 35-150 | 35-150 | 35-150 |
(MPa) Vacuum in idle in chamber | <=0.098 | <=0.098 | <=0.098 |
When use condensator, model and power of vacuum pump | 2X-15A 2kw | 2X-30A 3kw | 2X-70A 5.5kw |
When not use condensator, model and power of vacuum pump | SK-0.8 2.2kw | SK-3 5.5kw | SK-3 5.5kw |
(kg) Weight of drying chamber | 250 | 800 | 1400 |