Welcome to B2BAGE
sell 13.56MHz rfid reader JMY901 MCU:ARM9
sell 13.56MHz rfid reader JMY901 MCU:ARM9

Model No: JMY901

JMY901 series contactless IC card reader are based the NXP or compatible chip design. The reader supports series IC cards according to ISO14443A, ISO14443B, ISO15693 and ISO7816; various contactless IC card under international standard; especially the contactless CPU cards under ISO14443-4. Meanwhile the reader is available to pass EMV2000 and PBOC 2.0 and be authenticated by many laboratorial certifications---Visa Wave & Pay Pass (by FIME) and the Bank Card Test Center. There are 6 SAM card slots in the reader which support SAM cards compliant with ISO7816 (T=0 and T=1). The reader supports card-reset of various communication rate; PPSS operation after card-reset; SAM operation of various communication rate. JMY901 needs to be used in conjunction with JMY980 which supports Linux, WinCE6.0 embedded operating system. Qualifications: • PCD: NXP RC500,RC531,RC632,RC400;FM1722 • Working frequency: 13.56MHz • The operating frequency of the core board(JMY980): 400MHz • RF standard: ISO14443A, ISO14443B, ISO15693 • Operating distance: 100mm (Mifare One, typical distance) • SAM card slot: 6 slots (supported ISO7816 T=0 and T=1) • Interface: RS232C:1;USB HOST:2;USB SLAVE:1;10/100M Ethernet RJ45;TF card slot:1; 50ohm coaxial cable:2 • Power supply: DC5V or USB SLAVE • Power consumption: 1300mA • Dimension: 150mm × 118mm × 20mm • Weight: about 100g • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F) • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F) • Program: To provide the WinCE6.0 test software source code and the MasterRD.dll dynamic librarie; To provide MasterRD.so dynamic librarie based on Linux.

Ads by Google

Related Searches


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.