silicone heater real manufacturer for silicone heater fast delivery high safety OEM or ODM is welcomed any shap is available silicone heater silicone rubber heater silicone flexible heater silicone heater pad silicone heater mat silicone heater panel silicone heater sheet silicone heater blanket 1. Electric heating elements, 2. Fast heating,high thermal efficiency 3. long lifetime, 4. Material: Silicon rubber Introduction silicone rubber heater: silicone rubber heater heater is a kind of thin film which heats upon electrified, in a standard thickness of 1.5mm, Adopting nickel chrome wires or 0.05 mm~0.10mm thick nickel chrome foils etched to some certain shapes, the heating component is wrapped with heat conducting and insulating materials on both sides, and completed in high-temperature die forming and aging heat treatment. Due to its high reliability, the product is highly competitive when comparing with other electric heating film products which normally have paste materials such as graphite paste or resistor paste, etc. coated on insulation materials. As a kind of soft red film which can be applied closely on different curved surfaces, the silastic heater can be fabricated in varies shapes and powers. Our company designs, develops and manufactures silicone rubber heaters, technically eliminating the traditional "hard" defect, and they can be easily close to the heated object, and their shapes can be changed upon requests, providing a small temperature difference and efficient uniform heating surface. The products are widely used inhealth care, instrumentation, mechanical equipment, monitoring equipment and tubular and planar heat insulation. Characteristics of silicone rubber heater: 1. Fast heating with a coefficient of heat conductivity of only 1W/m.k. Due to its small thermal capacity, prompt turn on/off can be achieved. 2. High thermal efficiency: The temperature of electric heating film itself is only tens of centidegrees higher than that of the liquid when heating, which is 2-3 times energy saving than ordinary electric stoves. 3. Water, acid and alkali resistance, high-strength of electric insulation. 4. High mechanical strength with 100kg/cm² mechanical pressure. 5. Small size: Small space occupied when applying this heating product. 6. Easy application: Its self-insulation and free-of-open-fire property greatly help simplify the techniques of heat preservation and thermal insulation. 7. Its wide range of temperature,-60°C~250°C, can not be simply achieved by other electrical appliances. 8. Long service time: Under normal use, the product almost can be permanently and continuously used because nickel and chrome materials are durable to any corrosion, and the silastic has a high surface resistance up to 100kg/cm², which is uncomparable for any other electric heaters. 9. Made in any size, the temperature of the product can be precisely adjusted by temperature controller. Technical parameters of silastic heaters: Stangard High Temperature Continuous temperature 150.00°C 250.00°C The maximun temperature 250.00°C 280.00°C Dimensions Maximum 500.00mmx5000.00mm Minimum 25.00mmx25.00mm Thickness 1.50mm Wire length Stangard 200.00mm Silicone Rubber Heaters Technical Data: 1. Temperature range: -40.00~250.00°C 2. Electric resistance precision: ±10%( bigger value selected) 3. Power density: 0.10~1.50w/cm² 4. Mechanical pressure: 100.00kg/cm² 5. Minimum bending radius: 3.20mm Application of silicone rubber heater: 1. Industrial equipment, pipelines, barrels, tanks, etc. 2. Outdoors telecommunication equipment 3. Medical equipment and devices 4. Outdoors electronic devices 5.Thermal imaging of imaging equipment 6. Case protection under cold and moist environment 7. Industrial ovens and thermal processing equipment 8. Ventilator supports 9. Laminating equipment 10. Vessels Silicone rubber heater features: 1) Precise even heating 2) Temperature range of -60°C to 220°C continuously 3) Easily bonded and/or mechanically mounted to heat sink 4) Optional self adhesive backing (PSA) and available for thermal insulation backing 5) Available with either etched foil or wire elements 6) Minimum thickness of 0.5mm 7) Voltage: from 2 to 600V with either AC or DC voltage sources 8) Watt density: max. 10W/cm² silicone heater Applications: 1) Thermal developing in graphic imaging equipment; 2) Prevent condensation in motors or instrument cabinets; 3) Freeze or condensation prevention in housings containing electronic equipment, for examples: traffic signal boxes, automatic teller machines, temperature control panels, gas or liquid control valve housings 4) Composite bonding processes 5) Semiconductor process heating |