Use for cutting aluminum sheets,tubing extrusions and other non-ferrous with wall thickness up to 5mm or 10mm
Use for cutting aluminum and other non-ferrous with wall thickness up to 5mm or 10mm
The material must be clamped firmly to the table on both sides during cutting operation.
The use coolant is very important.
Code | D(mm) | B/b(mm) | Z | d(mm) |
KAC2(P)-200 | 200 | 2.8/2.2 | 100 | 25.4 |
KAC2(P)-230 | 230 | 2.8/2.2 | 100 | 25.4 |
KAC2(P)-250 | 250 | 3.2/2.2 | 80 | 25.4 |
KAC2(P)-250 | 250 | 3.2/2.2 | 100 | 25.4 |
KAC2(P)-250 | 250 | 3.2/2.2 | 120 | 30 |
KAC2(P)-300 | 300 | 3.2/2.4 | 96 | 30 |
KAC2(P)-300 | 300 | 3.2/2.4 | 100 | 30 |
KAC2(P)-300 | 300 | 3.2/2.4 | 120 | 30 |
KAC2(P)-350 | 350 | 3.5/2.4 | 100 | 30 |
KAC2(P)-350 | 350 | 3.5/2.6 | 120 | 30 |
KAC2(P)-400 | 400 | 3.6/2.8 | 100 | 30 |
KAC2(P)-400 | 400 | 3.6/2.8 | 120 | 30 |
KAC2(P)-450 | 450 | 4.0/3.2 | 100 | 30 |
KAC2(P)-450 | 450 | 4.0/3.2 | 120 | 30 |