Meter box
1.Rated voltage to 200 V and 380 V and 693 V,
2. Rated current of 10 A ~ 225 A

 DX-601CK-Single-phase 6 families meter box (with master box) 

DX series intelligence high protective meter box adopt the new environmental protection engineering plastic polycarbonate (PC) manufacture. With high insulation performance ,good transparent performance , uv resistance, ageing resistance, acid rain, salt-fog resistant, high temperature, low temperature resistance, impact resistance and other properties, and  good ventilation, rain-proof, and heat, and so one. The normal life will be up to 30 years.

This series meter box using integrated design concept, will various watt-hour meter and the measurement circuit containers in integrative closed box. It takes up the small space and easy to install and management.

This series meter box cabinet modelling is beautiful, scale symmetry, line fluent. It can be easily installed and firmly in the concrete wall through the back of the reserve bolt hole. The component compact structure is rational layout, the line to smooth clear. The box cover through the hook, special screws and padlock and cabinet interlock.Only electricity people use the wrench screw and key to open it. Electricity person does not need open immediately and see all kinds of the abnormal phenomenon, which exclude the safe hidden trouble. And come ture the "safety electricity, prevention first" .

Meter box application range and conditions 

DX series meter box is including the single-phase electric meter box and three-phase list box.They are suitable for the power supply system.

1. AC frequency 50 Hz or 60 Hz,

2. Rated voltage to 200 V and 380 V and 693 V,

3. Rated current of 10 A ~ 225 A

4. Work Temperature: -40 °C  ~ + 80 °C, and  average temperature not more than + 35 °C in 24hours

Meter box Main Technical Parameters 

1. Main Bus-bar rated current ln: 225 A ~ 10 A

2. Main Bus-bar rated shorttime withstand current LCW: 30 KA

3.Insulation resistance: no less than 20 M Ω

4. Rated insulation voltage Ui: 800 V

5. Frequency:  50 Hz or 60 Hz

6.Security protection grade IP: 43

1. When installation, please check carefully meter box of parts.

2.Meter box should be installed vertically, shall not exceed 5 ° Angle

3. Installation location should choose no violent vibration, impact and not enough to corrosion electrical components

4. Because of the electric meter box surfacematerial  is not able to bear or endure strong alkali, oxidizing acid and amine, ketone, soluble in chlorinated diameter classes and aromatic solvents, Pls  avoid contact with these chemicals or be used together.

5. In using process,  should avoid sharp objects and tough stuff collision scratch the surface of the electric meter box.

6. Meter box when installation should try to choose a cool and dry place, prevent sun direct illuminate a long time, in order to prolong the service life of the meter.