available for most of I.V. sets after an easy calibration;with only four buttons and one dial plate,the operation is very easy
Technical Specifications for LP2000-P2 Infusion Pump | |||
Model No. | LP2000-P2 | ||
Range of pre-set of infusion rate | 1-1000ml/h(1ml/h step) | ||
Range of pre-set of infusion volume | 1-9999ml | ||
Indication range of volume infused | 1-9999ml | ||
Applicable IV sets | Comply with all brands after calibration | ||
Accuracy | ±5% | ||
Bubble sensitivity | Detestability of air bubble ≥40uL | ||
Occlusion alarm pressure | 100KPa±20KPa | ||
Alarming | Air Bubble, Occlusion, Door Open, Complete infusion, Low power , Motor failure,Drop abnormal, Low temperature, Pause overtime | ||
KVO rate | KVO rate as at 1ml/h with flow rate no higher than 10ml/h; as at 3 ml/h with flow rate higher than10ml/h | ||
Internal battery | Fully charged 6 hours, the internal DC12V Ni-MH battery can continuously run over 4 hours at average rate level. | ||
Power | 100-240VAC 50/60Hz | ||
Power consumption | 18VA | ||
working environment | Operating Temperature | 5°C~40°C | |
Atmospheric pressure | 700 hPa~1060hPa | ||
Relative Humidity | 20%~90% | ||
Classification | Type BF, Class I continuous volumetric infusion pump with internal battery; IPXI (sealed drip-proof device) | ||
Appearance size | 165mm(length)×120mm(width)×210mm(height) | ||
Weight | 3.5kg | ||
Accessories | 1pc User’s Manual, 1pc power cable | ||
Service life | 3 years | ||
Warranty | 18 months | ||
Standards | ISO13485 & CE & IEC60601-1,IEC60601-1-4,EN60601-2-24 |