Water/oil/gas seperator for oil field
1.Capability:10 to 10,000 cubic meters per day
2.Water/gas/oil seperator

Water/oil/gas seperator for oil fieldBetter performance with compact compact volume, shorter processing time.

Water/oil/gas seperator

Performance and Application:

l         Used for dewatering, degassing and sand removal from crude oil

l         Any water content of inlet crude oil are applicable.

l         Any contents of oil and gas are applicable;

l         Crude oil density is less than 980 Kgs per cubic meter

l         Operating temperature is from -10 to 60°C

l         Operating pressure from 0.3 to 8.0Mpa

l         Processing capability is from 10 to 10,000 cubic meters per day

l         Dimensions of the tanks from OD2.2 m x 10 m to OD 3.2 x 18 m

l         Average water content in purified crude oil is less than 0.5%

l         Average gas content in purified crude oil is less than 0.005g per cubic meters

l         Oil content in the treated water is less than 50ppm

Advantanges

l         Embedded by pulse electric field. More than 90% of crude oil removal  clean  water once.

lSave the coalescence poling board and packing, Can make the equipment volume reduced by 66.7% and weight reduced by 50%.

l         Through the efficient components can remove the capture of gases. With more than 10μm diameter 99% of droplet, gas fluid containing less 0.03 g meet for requirements.

l         Using the inclined plate and the pressure inside the process that exclude, to improve the efficiency of clay sand (except (size) > 30μm. Except sand ratio (98%), ensure containers not accumulate sand (mud).

l         Using the computer intelligent control, automation system.

l         Traditional three-phase separation technology simplified,After the optimization process level, Improve production efficiency.