Due to the rapid increase in the need of energy source, more people start to become interested in Biomass Briquette business.

Complete Project of Charcoal / Biomass Briquette:

Prospect: Due to the rapid increase in the need of energy source, more people start to become interested in Charcoal / Biomass Briquette business. Charcoal / Biomass Briquette are renewable, Eco-friendly Energy especially for agricultural countries.

Charcoal / Biomass Briquette investment is a best project to generate revenue from agro-forestry waste and to produce Green Energy to save the global environment. The awareness of using Eco-friendly & Non-conventional Bio-coal / Bio-fuel is increasing day-to-day due to the increasing of the conventional fuel cost. This plant can make charcoal stick of different diameter and different shape from biomass and agro-forest waste.

Raw Material to make Charcoal / Biomass Briquette:Any type of Agro-Forestry waste can be used. But the Moisture Content Should be Less than 12%, grain size is below 5×5mm. Groundnut-shell Sugarcane Biogases Caster Shells/Stalk Saw dust Coffee Husk Paddy Straw Sunflower Stalk Cotton Stalks Tobacco waste Mustard Stalk Jute waste Bamboo Dust Tea waste Wheat Straw Palm husk Soybeans husk Coir Pitch Barks/Straws Rice Husks Forestry wastes Wood Chips and many other Agro wastes.

Flowchart of the Charcoal / Biomass Briquette Technology: Raw Material - Crusher - Drying - Biomass Briquette Press - Charcoal Bar Furnace - Finished Charcoal.

1. Crusher

FSJII Hammer Mill is suitable for milling raw material like tree branch, cotton stalk, corn stalk, wheat straw etc) with size less than 50mm(diameter). After milled, the output size can reach diameter 3-5mm, which is suitable for further briquetting.

FSJI Crusher is suitable for crushing raw wood with size less than 200mm (diameter). After milled, the output size can reach diameter 3-5mm, which is suitable for further briquetting.

The two kinds crushers are fitted to the downstream equipments.

2. Dryer

For raw materials with heavy moisture content that above 12%, you need to install a drier, this drier reduces the moisture content below 12% before feeding them into Biomass / Charcoal Briquetting Screw Press. Material for hot air stove: wood waste, wood briquette, coal, etc.

3. Biomass / Charcoal Briquette Screw Press

This Biomass / Charcoal Briquette Screw Press equipped with automatic temperature control are designed to produce high density charcoal. This can be achieved by 15kw-3phase-50hz electrical driven motor and 3 belts pulley for more stable power transfer. Normal capacity of standard model is about 6,000kg per day and can be operated 24 hours a day. The extruded wood briquette (before carbonization) can be used as fuel for wood boilers, stoves or for room heating, but this uncarbonized briquettes has some smoke while burning.

4. Charcoal Bar Furnace

This furnace is ideal equipment for wood briquettes to have anoxic distillation carbonization.

Due to its rational structure, the furnace only needs small quantity of heat consumption.

It adopted Superheated Stream cooling system, thus can speed up the cooling process, improve the quality of charcoal, and reduce the production cycling time. Its horizontal condenser can retrieve much wood tar.