Raw material waste tyre,rubber,plastics
Advanced technology& green
Oil yield rate 45%
low investment&high profits
Design
Advantage of plant
a. Save energy,environmental protection
b. High technical content, good safety performance, high efficiency, less investment, quick recovery
c. Easy operate,easy maintenance,long operating life
d. No special requirements with raw material
e. Auto alarm,decompression,removing carbon black,easy slag steel wire
f. Waste plastic,garbage, tyre and rubber,etc. can be recycle used again,and waste tyre can be refined after you get the carbon black,steel
Simple model
Structure and principle
1. Whole parts
The whole pyrolysis system is composed by 16 parts,which are reactor,Insulation layer,Desulfurization,deduster,Draft fan,Chimney,Water film cyclone,Condenser,Water tank,Cooling tower(optional),Gas recycle system,Oil tank,Gas separate,Waste gas burner,Furnace,Blower,Carbon black slag system.
The keys of pyrolysis plant are reactor and cooling system.
2. Reactor
Reactor directly decides the machine's safety and service life. It is made by welded steel plate. So the quality of welding will have a direct impact on safety and service life. Therefore, we use automatic welding machine, X-rays detection and heating treatment which will not only guarantee the quality of welding but also greatly improve working efficiency.
Technical Parameters for Waste Tyres Recycling Machinery
ITEM | CONTENT | ||
equipment’s model | XD-05 | XD-08 | XD-10 |
Daily Handling capacity | 5 tons | 8 tons | 10 tons |
Door's model | Semi-open door | Semi-open door | Semi-open door |
Structure Form | Horizontal type | Horizontal type | Horizontal type |
Raw material | Waste rubbers/tyres/plastic | Waste rubbers/tyres/plastic | Waste rubbers/tyres/plastic |
Material of reactor | Q245R thickness 14mm | Q245R thickness 14mm | Q245R thickness 14mm |
Main engine rotating speed | 0.4R /min | 0.4R /min | 0.4R /min |
Power | 10-15KW | 10-15KW | 10-15KW |
Cooling Mode | Water | Water | Water |
Consumption of Cooling water | 0.2 | 0.3 | 0.4 |
Heating Mode | Direct | Direct | Direct |
Installation | Main engine integral installation | Main engine integral installation | Main engine integral installation |
Noise dB (A) | <=85 | <=85 | <=85 |
Machine dimension(mm) | D2000*L6000 | D2200*L6600 | D2600*L6600 |
Working Mode | Intermittent | Intermittent | Intermittent |