1.T8 LED Tube CE ROHS&PSE
2.Lumens Flux:>1600LM
3.Light Efficieny:90LM/W
4.Illuminance(1.5m):>200Lux
Comparing with traditional fluorescent tubes, our LED tube can save 50% electricity cost. For example, our 8W, 10W,18W, 20W LED tubes can replace 16W, 20W,36W and 40W traditional fluorescent tubes. LED tubes do not need ballast or starter. It save another 8-13W.
high brightness SMD T8 LED tube
Specification:
| Model NO | HPE-T8-120CM-18W-LM |
| Input Voltage | AC 90V-260V |
| Operating Frequency | 50-60Hz |
| Power Consumption | 18W |
| Light Efficiency | 90LM/W |
| Diameter | 30mm Or 26mm |
| Length | 1213mm |
| Light Source | Low Power LED |
| LED Brand | TAIWAN Epistar LED |
| Type of LED | SMD 3528 Or 5050 Or 3020 |
| Illuminance | ≥200LUX(1.5metres) |
| Color | Warm White Or White Or Cool White |
| Color Temperature | 2800-3200K,5500-6000K,>6300k |
| Beam Angle | 120deg |
| Power Supply | Built-in Power Supply |
| Working Temperature | -20 to +50degree |
| Power Factor | 0.9-0.99 |
| Life-span | More than 50,000 hours |
| Certificate | CE& ROHS & PSE |
| Material | aluminum alloy, frosted PC cover |
| Socket | G13 |
| Unit LED intensity(lm) | 7-8lm |
| LED Quantity | 276 |
LEDS Lumen Attenuation:
| Operating time(hours) | Lumen decrease(%) |
| 5,000 | 2.4 |
| 10,000 | 5.2 |
| 20,000 | 11.3 |
| 50,000 | 24.5 |
Advantages:
1.LED tube has various colors for customers to choose. It can be available in various in single color or RGB color.
2.We have the R&D department to support and can supply the products according to your design and requirements.
3.Energy saving ,saving 50% than the traditional lights at the same brightness.
4.Inner high efficiency(95%)heat protection system, with the latest high efficiency and constant currency driver, making the products can work under unstable voltage.
5.Professional circuit design, each LED can work separately, thus it can avoid the influence caused by a broken single LED.
6.Anti-electric wave,no RF interference.
Detailed features:
1. There is No harsh glare, directly replacement for Traditional Fluorescent T8.
2. Integrated thermal management system.
3. Longlife time more than 50, 000 hours under normal use, especially for office lighting.
4. Optimized light extraction system delivery high lumens.
5. No RF interference, Lead free.
6. Long lifetime - LED feature, reasonable driving, no effect from switch on/off.
7. Green environment, without any harmful materials listed in RoHS.
8. No need maintenance, long life of LEDs, no trouble of replace parts of narmal fluorescent tube.
9. No flash, AC driving, stable light, protect eyes.
10. Good color vision, color temperature can be adjusted from 3000K to 13000K.
11. Easy mounting, can be mounted directly.
12. No need accessories, no need traditional driving and reflector parts.
13. Not easy broken, all materials from inner light sources and outer cases are hard materials, such as Epoxy, ABS, PC,
14. No electromagnetism interference, no high power switch and inductance parts, no environment electromagnetism pollution.
15. High power complication, no transformer, without additional power consumption.CE&ROHS&PSE so the quality is superior .
Application:
1. Instead of the indoors ceiling light
2. Factories, Offices,School,Universities,Hosptial
3. Conference,Meeting room,Show Room
4. Commercial Complexes
5. Super-markets
6. Residential,Institution building
Installation
The same size tube can be installed on to the corresponding lamp holder directly before taking
down fluorescent lamp starter.
1. LED tube can be directly installed into T8 or T10 bracket(take down fluorescent lamp starter);
2. LED tube light apply to inductive light holder. Electronic ballast fluorescent tube can’t be replaced directly,should take down electronic ballast.
