High Temperature Silicone Sealant GASKET MAKER Suitable for all vehicles & make any gasket instantly.High performance

 GASKET MAKER

1.Product Description
The product is a RTV & high temperature resistance siliocne rubber sealant , which is specially used in manufacture & repair of auto & machinery.

2.Product Characteristic
Withstand temperature up to 650F(34C)
The surface drying time is 10-20 mintues

Suitable for all vehicles & make any gasket instantly
Low volatile & valve covers
Intake manifold
Oil pump flanger
Transmission
Water pump 
 

Main Feature

Make Any Gasket Instantly

For All Vehicles

Low Volatile

Valve Covers

Intake Manifold

Oil Pump Flanger

Transmission

Water Pump

Type: Neutral , Acetate

Packing:85gm alum tube, 12pcs/box, 12box/carton

32gm alum blister tube , 12pcs/box , 12box/carton

Carton Size: 52x 26x43cm

Carton Size: 44.0 x 24.0 x 44.0 (cm)

silicone gasket maker can make any gasket instantly, After curing, it resists cracking, shrinking & migration caused by thermal cycling. it can work up to 280º C ,good resistance of oil, water, anti-freeze and transmission fluid. So it's widely used to seal timing chain covers & other different covers.
User's Guide:
1.  Clean all surfaces thoroughly. Remove old gaskets and prepare flange surfaces. Dry and remove all oil and grease;
2. Remove the cap, puncture inner seal of the tube, screw on nozzle and cut the nozzle to desired size;
3. Apply continuous, uniform 1~6mm bead around perimeter of one surface. Completely surround all bolt holes;
4. Wait about 10 minutes for silicone to skin over. Then reassemble the parts.
5. Silicone dries to touch in 1 hour and allow 24 hours to fully cure and bond.
Notes:
A)  Leave thickness for gasket when reassembling. Don't over-tighten the bolts.
B)  Sealant releases acetic acid (vinegar-like odor). Use with adequate ventilation.
C)  Replace the cap after use.