Carter CT45-7 Excavator
1.diesel power with EU III emission standard
2.imported hydraulic component
3.guarantee for 3 years
Carter CT45-7 Excavator
Japan made YANMAR engine 4TNV88Power 27.1KW/2200RPM, economic in saving gasoline
In conformity with the EU III emission control regulations
Imported hydraulic components, guarantee for 3 yrs under normal use and maintenance
Japan made KYB main pump, multi-circuit valve, swing motor, walking motor, South Korea made gasoline tank, rubber or steel pedrail
On-line digital monitoring and control system
GPS satellite(optional)and remote control diagnose system(optional)
Rubber pedrail(optional, or steel pedrail), no damage to the ground of roadLight and handy pilot operating system
Full opened engine hood and easy up-forward-lifted cab
Cold&warm air conditioner(optional)
SPECIFCATIONS
Operating weight | 4200 KG |
Travel speed | 4.4/2.7km/h |
Bucket Capacity | 0.17m3 |
Tracking force | 34.1kn |
Engine power | 27.1KW/2200RPM |
gradeability | 30°(58%) |
Swing speed | 11RPM |
Bucket digging force | 23.7 kn |
Ground Pressure | 33KPa |
Arm digging force | 18.5 kn |
Dimensions
Boom Length | 2.650 mm |
Arm Length | 1.600 mm |
Upperstructure width | 1.500 mm |
Undercarriage width | 1.630 mm |
Overall Height with cabinet | 2.455 mm |
Rear swing radius | 1.600 mm |
Clearance under counter weight | 585 mm |
Tumbler Distance | 1.710 mm |
Ground clearance | 350 mm |
Overall length for transportation | 5.560 mm |
working range
MAX digging radius | 5.720 mm |
MAX digging radius at ground lever | 5.610 mm |
MAX digging depth | 3.700 mm |
MAX vertical wall digging depth | 3.200 mm |
MAX digging height | 5.050 mm |
MAX dumping height | 3.500 mm |
MAX dozer cutting depth | 380 mm |
MAX dozer lifting height | 255 mm |
HYDRAULIC SYSTEM
FLOW/PRESSURE | 45.8*2+37 l/MIN / 2.200 RPM / 21MPA |
BUCKET | 24 MPA |
