TiNi alloy optical frame accessories
1. Material: TiNi alloy
2. Application: optical frame accessories
As(Fully annealed) | 20 |
Nominal Loading plateau stress@3% strain, in Austenite | 372Mpa 55,000psi |
Nominal Ultimate Tensile Strength in Austenite | 1190Mpa 172,500psi |
Max.Residual elongation after 8% strain in Austenite (%) | 0.5 |
Min.elongation to failure in Austenite | 10 |
Main Applications | Arch wires Bone staples Mobile antenna Eyeglass frames |
Diameter (mm) | 0.025--1±0.075 1—2.5±0.00127 2.5—4.4±0.025 |
Mechanical treatments | --Cold drawn --Superelastic --Trained |
Surface finish | --Hard dark Oxide --Dark Oxide --Drawn Bright --Pickled --Mechanically or electro-polished |
Typical impurity content in wt | O<250ppm C<250ppm Total all others<1000ppm |
Standard Cut-length | ±0.18mm for L<0.3m |
Tolerances Formats | ±0.2% of specified cut-length for L<0.3m Round, Square, Rectangular, Shaped wire |
(1) Upon Request Note: Refer to specifications for torqueability & straightness, Burr-free or sheer-cut available. |