compact press feed decoiler straightener and feeder
coil thickness; 0.6-6mm
coil width: 75-1000mm
coil weight: max 10 tons
STANDARD ACCESSORY for the NC Servo Feeder with Uncoiler and Straightener
1. Electric eye loop control system
2. A cluster gear set maximizes transmission of horsepower
3. Feed and straightener rolls with a hard chrome plated
4. Hold down arm device
5. Feeding line can be easily advance worm gear screw jacks Device
6. Reference indicator adjuster
7. Inverse curve feeding exit direction
8. Coil strip undig support device
9. Outgoing centenary to assist and support the material
10.Coil side guide
11.Transformer
12.PLC Control Feeding program from Mirsubishi
Model | TNCF4-300 | TNCF4-400 | TNCF4-500 | TNCF4-600 | TNCF4-700 | TNCF4-800 |
Width of Material (mm) | 75-300 | 75-400 | 75-500 | 75-600 | 75-700 | 75-800 |
Thickness of Material (mm) | 0.5-4.5 | |||||
Max coll Weight (kg) | 3000 | 5000 | ||||
Coil I.D.(mm) | 508 | |||||
Max. Coil O.D .(mm) | 1200 | |||||
Max. Speed(mm) | 16 | |||||
Feed Pitch Accuracy (mm) | +-0.15 | |||||
Feed Roll | Upper1/Lower1 | |||||
Work Roll | Upper1/Lower1 | |||||
Power Supply | 220VAC 60HZ | |||||
Air Power Supply | 5Kg/cm2 | |||||
Uncoiler Expansion | Hydraulic | |||||
Servo Motor (kw) | AC2.9 | AC4.4 | AC7.5 | |||
Uncoiler Meter(kw) | 2.2Kw |
| 3.7Kw | |||
SPECIFICATIONS | |||||||||||
Model | TNCF5-400 | TNCF5-500 | TNCF5-600 | TNCF5-700 | TNCF5-800 | TNCF5-1000 |
|
|
|
|
|
Width of Material (mm) | 75-300 | 75-400 | 75-500 | 75-600 | 75-300 | 75-400 | |||||
Thickness of Material (mm) | 0.6-6.0 | ||||||||||
Feed Roll | 1Set (Upper1 Lower1) | ||||||||||
Inverse Curve Roll | 1Set (Upper) | ||||||||||
Straighten Roll | Upper * 4 pcs lower * 3pcs | ||||||||||
Speed (m/min) | 16 | ||||||||||
Coil Weights (Kgs) | 3000 | 5000 | |||||||||
Coil I.D. (mm) | 508 | ||||||||||
CoilOI.D. (mm) | 1200 | ||||||||||
Uncoil Expansion | Hydraulic Operation | ||||||||||
Servo Motor (Kw) | AC4.4 AC5.0 AC7.5 | ||||||||||
Uncoiler Expansion | AC2.2 AC3.7 | ||||||||||
Power Supply (kg/cm) | 5 | ||||||||||
Feed Level from floor (mm) | 1100-1200 | ||||||||||
