Stranded Loose Tube Single Mode GYTA Outdoor Fiber Optic Cable
1.loose tube
2.Factory price
3.Timely delivery
4.UL,ROHS

Stranded Loose Tube Single Mode GYTA Outdoor Fiber Optic CableGYTA 24 core optical fiber cable
1.loose tube
2.Factory price ISO9001
3.Timely delivery
4.single mode optical fiber cable

5..outdoor fiber optical cable GYTA
6.100% cable core filling
7.moisture barrier
8.Stranded Loose Tube Non-armored Cable

GYTA- outdoor stranded loose tube single mode 24 core optical fiber cable  

outdoor  fiber optical cable GYTA

 1) Application of communicaiton GYTA  fiber optic cable

GYTA Fiber Optic Cable
1.Metallic strength member
2.loose-tube layer-stranded
3.outdoor cable for communication purpose

Metallic strength member, loose-tube layer-stranded, filled, laminated steel-polyethylene sheath or laminated aluminum-polyethylene sheath outdoor cable for communication purpose

1.Product Characteristics

1.Accurate excess length control and unique stranding process ensure excellent mechanical properties and environmental characteristics of the cable

2.Use of both coated steel(aluminum)tape as the moisture barrier and armor provides for the cable excellent pressure resistance as well

3.High strength phosphorized wire central strength member and good water-blocking compound improve the longitudinal water blocking performance

GYTA- outdoor stranded loose tube single mode 24 core optical fiber cable  

outdoor  fiber optical cable GYTA

The fibers, 125μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A Fiber Reinforced Plastic (FRP) locates in the center of core as a non-metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular core.

Then the cable core is covered with a thin polyethylene (PE) inner sheath, which is filled with jelly to protect it from water ingress. A layer of water-blocking material is applied around the cable core to prevent water ingress all the same. After a corrugated steel tape armor is applied. the cable is completed with a PE outer sheath.

Can be installed without shutting off the power

Excellent AT performance, The maximum inductive at the operating point of AT sheath can reach 25kV

Light weight and small diameter reducing the load caused by ice and wind and the load on towers and backprops

 Large span lengths and the largest span is over 1000m

Good performance of tensile strength and temperature

 The design life span is 30 years