Welcome to B2BAGE
1152 cores Fiber Optic Cross Connect Cabinet
1152 cores Fiber Optic Cross Connect Cabinet

Minimum Order: 0
Quality/Safety Certification: 0.00


Fiber Optic Cross Connect Cabinet
1.Adopt the 1.2mm stainless steel.
2.Capacity: 1152core
3.IP 65

 

 

Fiber Optic Cross Connect CabinetOverview: Cabinets are made of double side wiredrawing stainless steel, with the protection grade reaching IP65.thermosetting fiberglass-reinforced polyester can endure climate changes and adverse environment. All front access. Modular design; Flexible configuration and quick installation ; Suitable for ribbon and no ribbon optic fibers;30 °oblique installation of adapters, preventing eyes from laser's hurts and ensuring the fiber bending radius; Suitable for inserting installation of SC, FC,ST(additional flange) adapters; The bending radii are ensured to be more than 40mm in anyplace. Reliable fiber introduction, grounding and fixing; Swpa convenient; Suitable fiber integrated and optical fibers; A special suspension mechanism is designed to enable ground mounted, wall-mounted or aerial for users’ requirement.Major technical Parameters:   Relative humidity: less than 95%(When the temperature is below 40).
Atmospheric pressure:70~106KPa.
Transportation Temperature: -40~+60.
The dew-proof, the rainproof, the dustproof and thief proof are up to YD/T988-1998 standard.
Insertion loss: 1.31,1.55um LD lamp-house. SM≤0.18dB MM≤0.30dB.
Return loss:1.31,1.55um LD lamp-house. SM PC≥45dB UPC≥50dB APC≥60dB.
Insulation resistance between the cabinet and the earthing device: ≥2×104MΩ/500VDC.
Voltage-resistance strength between the cabinet and the earthing device: non-puncture, no arc-over under 3000VDC/1min.The requirements of the function: Fiber inlet, fixation and protection device should be provided. The fibers will be protected from being damaged when they are let in and fixed in the frame through these devices. The metal parts of the cables are insulated from the machine. The metal jacket of the cable & the reinforced core should be connected with the high voltage protective earthing device after being fixed;
2. The termination & connection function
Termination device should be provided, which is used for the connection operation, construction, installation & maintenance. It could fix and protect the connector and make sure the connector even but not displaced and free from external influence, guarantee the coiled fibers and pigtails not damaged;

 

 

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.