stainless steel wire mesh
material: S.S302,304,316,304L,316L,310,430 etc
our goods will be inspected one by one
stainless steel wure mesh
woven pattern: plain weave, twill weave,plain ducth weave, twill dutch weave, reverse plain dutch weave.
Application: use for mining,chemical industry,food industry and pharmaceutical industry because of the charateristics of wear-resisting, heat-resisting, acid-resisting and corrosion resisting.
Plain weave
The plain wire cloth weave is the most common wire cloth used and it is one of the simplest wire cloths. The plain wire cloths are not crimped before weaving, and each warp wire passes over under the wires running through the cloth at 90 degree angles. Warp and weft wire diameters are generally the same.Used for the majority of commercial applications and for filtration where a high flow rate is required.
Twill weave
Each weft wire passes alternately above and below every successive pair of wrap wires and vice versa. This weave permits a heavier wire diameter to be used than would be possible in a plain weave with similar mesh count.This ability allows the application of this wire cloth for greater loads and finer filtration.
Mesh / Inch | Wire Diameter (MM) | State |
2 | 1.8 | Crimped mesh type |
3 | 1.6 | |
4 | 1.0 | |
7 | 0.81 | |
8 | 0.81 | |
10 | 0.81 | |
12 | 0.71 | |
14 | 0.71 | Plain weave type |
20 | 0.35 | |
30 | 0.30 | |
40 | 0.23 | |
50 | 0.20 | |
60 | 0.15 | |
80 | 0.12 | |
100 | 0.10 | |
120 | 0.08 | |
150 | 0.06 | |
160 | 0.06 | Twilled weave type |
180 | 0.053 | |
200 | 0.053 | |
250 | 0.04 | |
280 | 0.04 | |
300 | 0.04 | |
325 | 0.035 | |
350 | 0.03 | |
400 | 0.03 | |
Mesh Width: From 0.5mtrs to 6mtrs |