Addressable Fire Alarm System Hooter/Horn
fire alarm system

Addressable Fire Alarm System Hooter/Horn AW-ASS2188

Product Features

It can realize complete electronic coding and in situ rewriting with the help of a coder.

The audible alarm and flashing alarm may be set freely. In other words, the hooter/horn may give an audible alarm and a flashing alarm at the same time or separately and it can be adapted to different working environments.

 Designed with an upper cover and a lower cover, it can be installed, debugged and maintained conveniently.

It uses multiple super bright red LEDs as light sources for visual display, ensuring a striking display, a longer service life and low power consumption.

Technical parameters

1.  Executive standard: GA385- 2002

2. Operating voltage: DC24V (pulse modulation)

3.  Operating current: quiescent current: ≤1mA (the current consumed by the bus); alarm current: ≤120mA@DC24V

4.  Operating environment: Temperature: -10°C~+55°C; relative humidity: ≤95% (40°C, without condensation)

5.  Flushing rate: one time/s

6.  Alarm volume: >85dB (measured at a place 3m in front of the hooter/horn)

7.  Coding method: Electronic coding

8.  Wiring method: Four-wire system, non-polarity two signal buses (L1, L2) and power lines (+24V, GND)

            9.  Matched host machine: fire alarm control panel (such as AW-AFP2188)