zigbee ip modem
1.data transfer by public GPRS and ZigBee network
2.Housing(iron)
3.Weight(210g)
4.industrial 32 bits CPU
F8114 ZigBee+GPRS IP MODEM is a kind of data terminal device that provides data transfer function by public GPRS and ZigBee network.
It adopts high-powered industrial 32 bits CPU and embedded real time operating system. It supports RS232, RS485 (or RS422) and ZigBee port that can conveniently and transparently connect one device to a cellular network, allowing you to connect to your existing serial and ZigBee devices with only basic configuration. It has low power consumption states in which the power consumption could be 1ower than 1mA@12VDC. It has compatible digital I/O channel, ADC, input pulse counter and pulse wave output function.
It has been widely used on M2M fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on.
1.
Design for Industrial Application
High-powered industrial cellular module
High-powered industrial ZigBee module
High-powered industrial 32 bits CPU
Support low power consumption mode, including multi-sleep and trigger modes to reduce the power dissipation farthest
Embedded Real Time Clock(RTC) circuit which can realize timing online/offline function
Housing: iron, providing IP30 protection
Power range: DC 5~35V
2.
Stability and Reliability
Support hardware and software WDT
Support auto recovery mechanism, including online detect, auto redial when offline to make it always online
RS232/RS485/RS422 ports:15KV ESD protection
SIM/UIM port: 15KV ESD protection
Power port: reverse-voltage and overvoltage protection
Antenna port: lightning protection(optional)
Cellular Specification
Item | Content |
Cellular Module | Industrial cellular module |
Standard and Band | EGSM900/GSM1800MHz, GSM850/900/1800/1900MHz(optional) Compliant to GSM phase 2/2+ GPRS class 10, class 12(optional) |
Bandwidth | 85.6Kbps |
TX power | GSM850/900: <33dBm GSM1800/1900: <30dBm |
RX sensitivity | <-107dBm |
ZigBee Specification
Item | Content |
ZigBee Module | Industrial ZigBee module |
Standard and Band | IEEE 802.15.4 ISM 2.4 GHz |
Indoor/Urban Range | 60m 90m(for enhanced version) |
Outdoor/RF Line-of-Sight Range | 1200m 3200m(for enhanced version) |
Transmit Power | 3.1 mw (+5dBm) /Normal mode, 6.3 mw (+8dBm)/Boost mode 63 mw (+18dBm) (for enhanced version) |
Bandwidth | 250Kbps |
Receiver Sensitivity | -102dBm |
Network Topologies | Point-to-Point, Point-to-Multipoint, Peer-to-Peer and Mesh |
Number of channels | 16 Direct Sequence Channels 15 Direct Sequence Channels (for enhanced version) |
Channels | 11 to 26 11 to 25 (for enhanced version) |
Hardware System
Item | Content |
CPU | Industrial 32 bits CPU |
FLASH | 512KB (Extendable) |
SRAM | 256KB(Extendable) |
Interface Type
Item | Content |
Serial | 1 RS232 port and 1 RS485(orRS422) port, 15KV ESD protection Data bits: 5, 6 ,7, 8 Stop bits: 1, 1.5, 2 Parity: none, even, odd, space, mark Baud rate: 110~230400 bps |
Indicator | "Power", "ACT", "Online", "ZigBee" |
Antenna | Cellular: Standard SMA female interface, 50 ohm, lighting protection(optional) ZigBee: Standard SMA female interface, 50 ohm, lighting protection(optional) |
SIM/UIM | Standard 3V/1.8V user card interface, 15KV ESD protection |
Power | Terminal block interface, reverse-voltage and overvoltage protection |
|
Power Input
Item | Content |
Standard Power | DC 12V/0.5A |
Power Range | DC 5~35V |
Physical Characteristics
Item | Content |
Housing | Iron, providing IP30 protection |
Dimensions | 91x58.5x22 mm |
Weight | 210g |