HID Flashlight For Search,Portable, Super Bright, Waterproof, Quakeproof, Low Power Consumption
HID Flashlight for search,
Our company exploits the search lamp In the contour e use the high strength aluminum alloy material , the handsome and smooth appearance, the sturdy and reasonable construction, simultaneously it has good waterproof performance and reliable high temperature protective device, easy to operator. It is suitable in the public security patrol, the fire direction, the border defense patrols, the electric power emergency repair, the Enterprises and institutions security guards, and in night accident the flood-fighting emergency and so on, also in the signal contact and the position indicate.
Parameter:
Input Voltage: DC10V~16.8V
Operation Current: 2.5A
Max Luminous: 4500LM
Beam Spread: 42°~50°
Lamp Source: HID Lamp
Lamp Power: 35~45W
Color Temp.: 6000K
Lamp Lifetime: ≥2200hrs
Lumen distance: 0.01km~0.1km
Weight: 2.1kg
Dimensions: 105 x 205 x 430mm
Battery Type: Li-ion
Battery Capacity: DC 14.4V 6.6Ah
Battery Run Time: 3hrs
Charger Input Voltage: AC100~240
Charging Time: 3.5hrs+/-30mins
Charger Voltage16.8V/2A
Change battery:
1) Turn the original battery counterclockwise
2) Take off the original battery and replace new one
ACCESSORIES:
1) Alloy carry case
2) Shoulder belt
3) AC battery charger
4) Instruction manual
SWITCHES:
ON/OFF:
When you press it one time, it will turn on; within 1s it will reach 20% lighting, About 4s latter it will reach 80% lighting. Press it again, the light will turn off.
BOOST:
The BOOST switch will enable you in time of need to increase the power from 35W to 50W.
While pressed this switch will hold the lamp power at 50W and then will cut out back to its original stage automatically.
Just press that push button again it will return at your demand to its regular running stage.
LED:
Led button is show the battery capacity when you press Boost button. Green: 100% fully battery
Capacity Yellow: 50% rest of battery Capacity Red: 10% rest and needs charging timely
CHARGING:
Insert the plug of the charger into the lamp jack, and then connect the power. The indicator lamp turn red, after 4hrs it will turn green, it means full charge. You can use it.
ATTENTION
1) You should place the unit on charge first time for approximately 8 hours.
2) When on charge the charger LED will indicate by Red LED which will burn till the batteries are fully charged and then it will turn in to Green.
3) Do not operate the searchlight if the front window has been damaged.
4) Please close searching light when charge every time.
5) Long time no use; please make sure that to charge every three months.
6) In order to avoid over charging, the charging time should not over 16 hours.
WARNING
1) Do not dismantle the light, if need repair, please turn to professional worker.
2) Inspect the light externally and make sure that prior to activation you charge the batteries with your enclosed battery charger.
3) Do not short circuit, and reverse connection of the battery.
4) Do not touch the mental part for its high temp Children do not touch.
5) Avoiding hurt your eyes please not look the beam directly.