Welcome to B2BAGE
TYPE SIMTH8015 SMART FLOW ACCUMULATOR
TYPE SIMTH8015 SMART FLOW ACCUMULATOR

Minimum Order: 0
Quality/Safety Certification: 0.00


1. flow meter,a variety of input signals
2. temperature and pressure compensation
3.a variety of formulas for all occasions

<1>The series of Smith 8015 more function flow controller is specifically designed for supporting various instruments. It is applicable to all kinds of liquids, gases and steam flow calculation and controller. It has a variety of input signals, the temperature and pressure compensation, matching various types of the frequency  flow sensor. You can randomly change the input form of the signal. It is only changing the internal instrument settings parameters from the original input signal to form another form. With a wide range of information that can show that the five instantaneous flow value,temperature compensation values, the pressure compensation measurements, 12 total flow measurement values can be set instrument parameters, the largest instrument median total output of about 15. Through the look-up table method density compensation, the saturated steam, superheated steam for very high-precision measurement and control. It is built-in a variety of formulas for different form of measurement all occasions.

<2>Main technical parameters

1,The input signal:

Pulse volume: rectangular, sine wave, triangle wave (photovoltaic isolation> 4 V, 0 ~ 5000Hz, or upon request customized)

Analog:  Current 0~10mA, 4 ~ 20mA, 0 ~ 20mA, etc. (input resistance ≤ 250 EU) voltage 0 to 5 V, 1 ~ 5V, or mV, such as thermal resistance (Pt100), thermocouples (K, E) start, stop, and so cleared.
Input Signal Switching:  Pt100 temperature compensation, K, E, 0~5V, 0~10mA, 4 ~ 20mA (through internal parameters can freely switch)
Pressure Compensation:  0 ~5 V, 1 ~ 5V, 0~10mA, 4 ~ 20mA (through internal parameters can freely switch)
Traffic signal:  0 ~ 5 V, 1 ~ 5V, 0~10mA, 4 ~ 20mA or frequency signals (through internal parameters can freely switch)
2, The output signal: analog output:  DC 0 ~ 10mA (load resistor ≤ 750ω)

DC 4-20mA (resistance load ≤ 500 ω)  

DC 0-5V (output resistance ≥ 250 K ω)

DC 1 ~ 5V (output resistance ≥ 250 K ω)
Switch output:  Relay output control - relay ON / OFF. AC220V/3A, DC24V/3A (resistive load)
Communications output:  two-way interface standard serial communication interface, photoelectric isolation, RS485, RS232, RS422, such as baud rate -300 to 9600 BPS internal free to set up feed output DC24V, load ≤ 3mA
3, Characteristics:  

Mathematical model:   See Instrument Manual measurement accuracy
Measurements show that the accuracy:   ± 0.2% FS or ± 0.5% FS
Accuracy: ± pulse frequency converter (LMS) typically better than 0.2% resolution 1%
Measurement Range:   -1999~ 99,999 word 
Display:    0-99999 (instantaneous flow measurement values shown)  work status display

                 0 ~ 99,999,999,999 (cumulative value shown)

                 -1999 ~ 99999 (temperature compensation measurements show)
                 0 ~ 99999 (pressure measurements showed that compensation)

                 0 ~99,999 flow (differential pressure, frequency measurements show that)

The current date and time display LED status display work
High Brightness LED (LED) measurements show that the Chinese or the entire screen with backlit LCD (liquid crystal) measurements show  
Control of warning: choose Relay ceiling limit control (or alarm) output, LED output instructions, control (or alarm) way back poor (user can freely set)
Quantitative control:  Quantitative choose to relay traffic control instructions LED output option relay flow quantitative process control, alarm LED output accuracy  ± 1 instruction word
Temperature Compensation:  0 ~ 50°C Digital automatic temperature compensation
Parameter Settings: touch-panel button × digital set parameters set after the permanent preservation of power parameter settings × password lock
Protection:   power flow after more than five years total time maintaining the abnormal

working × automatic restoration

<3>Instrument Installation 

Smith 8015-90 type

Smith8015-80H Horizontal

 

Smith8015-80S Shaft

Wide

High

Deep

Wide

High

Deep

Wide

High

Deep

96mm

96mm

105mm

160mm

80mm

140mm

80mm

160mm

140mm

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.