flow meter,oil flow meter:for all kinds of liquid,gas,steam
100~4000mm/s.s.304
easy install&operation
high accuracy,quality
flow meter,oil flow meter,fuel dispenser flow meter
Each of Rixin’s flow meter is made according to your special need
SBL target flowmeter with digital display is a completely new force induction target flowmeter developed based on measurement principle of traditional target flowmeter, making full use of most excellent features of the same, and in combination with new transducer technology and modern digital technology. This product not only features the characteristic of no movable part as in traditional flowmeters such as target flowmeter, orifice flowmeter and vortex flowmeter, but also a measurement accuracy matching that of volumetric flowmeter. In addition, this product has the performance against interference and impurities, and is light and reliable, hence is widely used in petroleum industry, chemical engineering, energy industry, food industry, environmental protection and water conservancy etc.
what make our Target type flowmeter better and different than other flowmeters are as following
1.Target type flow meter won the characteristic of anti-impurity.
eg. other flow meter can not test waste water, impurity fuel, base oil...but, we can
2.Target typeflow meter can anti-interfere.
eg. even near the pump, the accuracy won't be effected.
3.Target type flow meter strongly anti-sticky.
eg. strong sticky fluid like bitumen can be tested
4.Target type flow meter have corrosion resistance
eg.sulfate...
5. Target type flow meter has no removable.
that means, all functional parts are install in one Targettype flow meter, just install the flow meter by our introduction, everything will be ok. that is why our repair rate is much lower than others.
Description
(1) Description of flange
Short connection flange shall execute relevant technical requirements in state standard GB/T9115.1~9115.4-2000, or special standard such as American or European standard as required by user.
(2) Description of structure
a. For actual dimensions of high temperature or temperature/pressure compensation inserted type flowmeter, ex-factory (order) status shall govern.
b. When media temperature of high temperature type flowmeter is >200, the instrument must be installed up-side-down and horizontally. The design shall consider sufficient mounting space.
c. If the media flow up-down or down-up, for ordering, please note: right view, left view (showing gauge head).
In this design, only fixed inserted type is provided; if telescopic online removable type is required, particular size shall be determined with manufacturer.
main technical indices | |||||||
Measured media | Liquid, gas, steam | ||||||
Nominal diameter | Pipeline type 15~300mm | Clamped mounting type 15~600mm | Inserted type 100~2000mm | ||||
Nominal pressure | 0~55MPa | 0~55MPa | 0~55MPa | ||||
Media temperature | -20~70 (normal temperature type) -196~+700oC (high/low temperature type) | ||||||
Accuracy | ±0.2% | ±0.5% | ±1.0% | ±1.5% | ±2.5% | ||
Range degree | 1:10 | 1:15 | 1:30 | 1:100 (gas) | 1:15(steam) | ||
Compensation type | Temperature compensation; pressure compensation | ||||||
Repeatability | 0.1%~0.08% | ||||||
Power supply | Built-in 3.6V Li batter; external power supply of 24VDC; 220VAC (only for separate digital tube) | ||||||
Output forms | Site display reading; 4~20mA (2-wire system); pulse; 0~10V; RS232/RS485 (optional);HART PROTOCOL | ||||||
Measurement tube Material | Carbon steel; 304; 316L; also supplied to user requirement | ||||||
Explosion-proof sign | Intrinsically safe type (ExiallCT4); Explosion isolating type (ExiallBT4) | ||||||
Protection class | IP65; IP67;IP68 |
Note: Size of flowmeter flange shall execute GB/T9115.1~9115.4~2000 series standard. For pipeline type, small diameter flowmeter of DN6, DN8, DN10 etc. can be manufactured to user requirements.