efficient coal briquette machine
1.capacity:200-400 kg/h
2.inlet humidity below 12%
3.output size:40-90mm
4.rational price

 

 Biomass briquette screw machine

 

 

 

Brief introduction

The moisture content of  raw materials after drying is about 12% or less, then materials are plastination after into the machine  by high temperature and pressure bar (do not add any additives) ,finally materials are formed into the carbonization furnace . 

The charcoal briqute machine can be used with dual-purpose: raw material can be made first carbonized, also can be made first briquetted.

 Technique specifications  

Finished mechanism 

 

 

 

 

Advantages of machine-made charcoal:

Increase the net calorific value per unit volume after biomass briquetting Easy to transport and store as densities product Uniform in size and quality as a kind of biofuel briquette Smokeless, odorless, innocuity Long burning, high heat value No bursting, low ash 

 

The points for attention in operating:

Before starting, fasten each bolt, inspect the power source, the electric circuit;Before the production, heat up till the temperature arrives about 350°C, or adjust according to raw material, make sure the humidity of raw material is below 12%;Prohibit sundry goods, metal waste block to getting in the hopper to damage the equipment;Start the machine, inspect whether each parts running smoothly. If finding unusual circumstance, slow down the feeding until the machine runs regularly.

 

Should you interest in our products and want to know more, don't hesitate to let me know, you can find me according to the following information: