* Double drive for the front wheel.
* Suspended seat for operators,
according to the weight.
KEF10E
Type | KEF10E | |
Specification | Rated load capacity(kg) | 1000 |
Load center(mm) | 500 | |
Max. Lifting height(mm) | 3000 | |
Fork tilt(F/R)(deg) | 6º/6º | |
Min. Turning radius(mm) | 1520 | |
Max.Traveling speed(km/h) | 18 | |
Dimension | Length (to fork end)(mm) | 1943 |
Width(mm) | 1080 | |
Canopy guard height(mm) | 1975 | |
Min.mast height(mm) | 1990 | |
Wheel tread(mm) | 890 | |
Wheel base(mm) | 1310 | |
Fork (L*W*H)(mm) | 35*100*920 | |
Fork adjusting range (min./max.)(mm) | 200/920 | |
Weight(kg) | 2510 | |
Tire | Front tire(mm) | 18*7.8 |
Rear tire(mm) | 16*6.8 | |
Power System | Battery voltage/capacity(V/Ah) | 48*420 |
Controlling system | AC frequency conversion control | |
SAFE OPERATION
Fork Horizontal Control (Optional)
When the fork is working, it can be kept at the horizontal position, easy for loading or unloading goods.
The working efficiency is greatly improved.
Speed Control Function (Optional)
The mast’s tilt speed and forklift’s travel speed will be controlled when the mast is at high goods alloca-
tion, improving the operation security.
Fork Lockup Function (Optional)
Whether the starting switch is on or off, the fork will be locked when the driver is not on the seat, so that
the mistaken operation is avoided.
SAFE DRIVING
Induction Device
If the driver leaves the seat during traveling or in the case of incorrect sitting position, the forklift will auto
matically stop unloading or traveling.
Steering Synchronization System (Optional)
The steering synchronization ensures smooth steering and easier operation.
Speed Control at Sharp Turn (Optional)
The traveling speed will be automatically controlled in the case of sharp turn,
and the steering device is locked.
Automatic Load Measurement (Optional)
The lifting system will automatically measure the load, if the measured load exceeds the rated load,
it will give an alarm.
Reliable Accelerator
Build-in safety switch ensures safe traveling and breaking. More than 10 million times working life
makes the forklift more reliable.
Emergency Stop Button
Cut off the power in the emergency case.
SAFE PROTECTION
High Strength and Overall Pressing Canopy Guard
The canopy guard applies overall pressing and the front/rear column applies irregular section steel.
The integrated intensity is strengthened and the forklift looks more beautiful.
Cushion Control Function-lift (Optional)
When the fork drops to the ground or rises to the top, the cushion device
will effectively prevent the service wear.
Cushion Control Function (Optional)
When the fork drops to the ground or rises to the top, the cushion device
will effectively prevent the service wear.
Neutral Gear Locking
Start the forklift only when it keeps in the neutral position.
Safety Indication Lamps
Eye-catching safety indication lamps ensure safe traveling.
ERGONOMICS
Simple and Multifunctional Operation Panel
Read the operation information clearly and easily on the multifunctional LCD panel.
Super-wide Vision
The lift cylinder is installed behind of the mast. This optimal design successfully widens both the
mast’s width and driver’s vision.
Excellent All-round Visibility
Simple and clear operation panel ensures excellent all-round visibility for the driver.
Adjustable Steering Column
The inclination angle of steering column could be adjusted to give the driver the most comfort.
Commodious Cab
The cab is expanded due to the arc design of front/rear column. The driver will feel more
comfortable in case of long-time operation.
Wide Entrance and Low Pedal
The wide entrance and low pedal make it easier to get on/off the forklift,
especially in the case of busy operation.
Pivot Turn Device
Applying the new type of dual-drive AC motor, the two drive units steer at the opposite direction,
so that pivot turn is realized.
Comfortable Suspended Seat
Appling the new type of suspended seat, adjust the bearing capacity according to the weight,
and provide the most comfort. The moving range is as for as 150mm.
Foot Brake System
Step on the brake to stop the forklift and then unlock it by another step. It is very convenient and
no need to change the sitting position.
Fingertip Control System (Optional)
Advanced intelligent fingertip control system, adjust the forklift specifications according to the
driver’s stature and provide the most comfort. The working efficiency, as well as the energy
use ratio is greatly improved.
EASY MAINTENANCE
Lower Maintenance Cost
Applying the new generation AC driving motor, there is no need of carbon brush or changing
the easy wearing parts. So the maintenance cost is greatly reduced.
