Residual Capacity at different lifting height 1KG=2.2LB 1INCH=25.4MM Up to h3 mm | ACTUAL CAPACITY (Q) kg | 2500 | 1200 | 800 | 2900 | 1000 | 650 | 3200 | 800 | 500 | Load centre distance (C)mm | 600 | 700 |
Smooth travel and lift with excellent controls to reduces product damages and increases productivity. Lift limit switch operates at maximum lift height to shut off pump motor. A heavy-duty 24-volt electrical system provides good travel and lift speeds. The CURTIS electronic controller helps provide plenty of low end torgue while increasing the motor and battery lift. Foot pedal reduces fatigue. Conforms to EN 1726-1 and EN 1175-1 1KG=2.2LB 1INCH=25.4MM Identification | 1.2 | Manufacturers type designation | | CL1212 | CL1217 | CL1226 | CL1232 | CL1026 | CL1032 | 1.3 | Drive:electric(battery or mains),diesel, petrol,fuel gas,manual | | Electric | 1.4 | Type of operation:hand,pedestrian,stand ing,seated, order-picker) | | Pedestrian | 1.5 | Load Capacity /rated load | Q (t) | 1.2 | 1.0 | 1.6 | Load center distance | C mm
| 600 | 1.8 | Load distance, centre of drive axle to fork | X mm | 711 | 692 | 1.9 | Wheelbase | y mm | 1160 | Weights | 2.1 | service Weight | Kg | 750 | 785 | 860 | 885 | 840 | 865 | 2.2 | Axle loading, laden front/rear | Kg | 925/1025 | 940/1045 | 980/1080 | 990/1095 | 875/965 | 885/980 | 2.3 | Axle loadings, unladen front/rear | Kg | 550/200 | 580/205 | 635/225 | 655/230 | 620/220 | 640/225 | Wheels,Chassis | 3.1 | Tyres:solid rubber, superelastic, pneumatic, polyurethane) | | polyurethane | 3.2 | Tyre size, front | | 250x78 | 3.3 | Tyre size, rear | | 80x70 1) | 3.4 | Additional wheels(dimensions) | | 150x54 | 3.5 | Wheels, number front/rear(x=driven wheels) | | 1x+2/4 | 3.6 | Track width,front | b10(mm) | 685 | 3.7 | Track width,rear | b11(mm) | 390/515 | Basic Dimensions | 4.2 | Lowered mast height | h1(mm) | 1565 | 2075 | 1800 | 2095 | 1800 | 2095 | 4.3 | Free lift | h2(mm) | - | - | 144 | 144 | 144 | 144 | 4.4 | Lift height | h3(mm) | 1114 | 1614 | 2514 | 3114 | 2514 | 3114 | 4.5 | Extended mast height | h4(mm) | 1565 | 2075 | 2920 | 3530 | 2920 | 3530 | 4.9 | Height of tiller in drive position min./max. | h14(mm) | 985/1365 | 4.15 | Lowered height | h13(mm) | 86 | 4.19 | Overall length | l1(mm) | 1860 | 4.20 | Length to face of forks | l2(mm) | 710 | 4.21 | Overall width | b1(mm) | 805 | 4.22 | Fork dimensions | s/e/l(mm) | 60/80/1150 | 4.25 | Width over forks | b5(mm) | 570/695 | 4.32 | Ground clearance, center of wheelbase | m2(mm) | 50 | 4.33 | Aisle width for pallets 1000x1200 crossways | Ast(mm) | 2126 | 2135 | 4.34 | Aisle width for pallets 800x1200 lengthways | Ast(mm) | 2092 | 2106 | 4.35 | Turning radius | Wa(mm) | 1460 | Performance Data | 5.1 | Travel Speed, laden/unladen | km/h | 5.2/5.5 | 5.2 | Lift speed, laden/unladen | mm/s | 105/150 | 5.3 | Lowering speed, laden/unladen | mm/s | 100/95 | 5.8 | Max.gradient performance, laden/unladen | % | 6/12 | 5.10 | Service brake | | Electromagnetic | E-Motor | 6.1 | Drive motor rating s2 60min | kw | 1.2 | 6.2 | Lift motor rating at s3 15% | kw | 2.2 | 6.3 | Battery acc. To DIN, no | | 3PZS | 6.4 | Battery voltage, norminal capacity | V/Ah | 24/210 | Others | 8.1 | Type of drive control | | MOSFET Control | 8.4 | Sound level at drivers ear acc.to EN12053 | dB(A) | 67 | 1)Single wheel Φ80x93 |
This specification sheet according to VDI regulation 2198 only provides technical values for the standard truck. Non-standard types, different masts, additional equipment, etc. could produce other values. Right reserved for technical changes and improvements. |