our formwork :
all can be adjustable,cycle used ,save money ,time,labor,no need wood and nail any more
it is used for forming concrete ceiling slab, concrete column,concrete beam and forming concrete shear walls, insteads of wood scaffold.no need wood and nails .
1,Material It is made of high pure cold steel ,it’s thickness is 2 to 2.5 milimeter ,the characteristics of this kind of new material is corrosion endurable ,the flexibility is big,, firm and not easy to be deformed .
Main-Beam The main beam can adjust length within the scope of 1.17m to 4.39m at will, the short spine is used in balcony tolite and so on .
B-1 2.68m to 4.39m
B-2 2.28m to 3.68m
B-3 1.77m to 2.88m
B-4 1.17m to 1.78m
Sub Beam The sub beam has the specification of 1.15m , 0.8m , 0.4m
props:Material: Q235 diameter 48mm, thickness 2.75mm.
Specifications: 075m, 1.05m, 1.35m, 1.95m, 2.55m ( these are the normal sizes and we can also produce the other sizes below 2.55m according to your request. Also suitable for different height buildings by connecting the vertical props.
Our floor scaffold system is unlike tradtional scaffold, it is all made of steel, as you see the picture, it is just like a big steel structure which is very easy to be fixed, in fact it is as easy as to building block. when it is fixed, you can put the plywood( some area called plank or formwork) on the top of the structure, the plawood will be next to the main beam and the vice beam. Bye the way,the rod(scaffold props) will support the main beam, and the vice beam will be put in to the main beam, so this is how the structure be set up.
compare with the traditional products
our new type scaffolding and formwork are a kind products instead of the timbers and steel tubes with couplers in the constrution site, the formwork to support the plywood is adjustable and also have many sizes, so it is suitable for different design buildings, with our products you needn't use any timbers and it is really save materials, the scaffolding part also have many specifications suitable for different height buildings by connected them together, even though you needn't any connecters to connect two pieces of props, because the smart design make them can connected, with our products really time-saving, money-saving, labor-saving. if you build a 20 floors buildings and the area of per floor is 1000m2 , and if you buy our products for two floors, when you finish the project , it only need about 3.5 dollar/m2(1250usd x 56ton=70000usd then use the total value divide the total area 20000)