The fuse alams are used in electric lines of AC50Hz and rated voltage up to 1000V as melting signal/siren for the fuse links
ApplicationsThis series of fuse alams are used in electric lines of AC50Hz and rated voltage up to 1000V as melting signal/siren for the fuse links Design FeaturesIt's made up of the following parts: 1. Melt striker; 2. Micro switch (with one normal close contact and one normal open contact); 3. A base for the striker and the switch. Fuse alarms are usually paralleled under the lid fasening screws at the ends of the fuse. When the fuse breaks, the striking pin springs out of the striker, the microswitch pushed and signal sent out or circuit cut down, The cistance between the two fastening ends can be adjusted in a certain range for paralleling to fuses with different hights.
Table 1
| Models | Components. | Rated insulation voltage (V) | Dimensions/ Sizes(mm) | Weight (g) | |||||
| Fig. | L1 | L2 | D | d | A | ||||
| RX1-1000 | Striker | 1000 | Figure 1 | 82 | 89 | 11 | 7.5 | 7.5 | 17 |
| RX2-1000 | |||||||||
| RZS1-1000 | Striker | 1000 | 58 | 64 | 11 | 5 | 12 | 15.5 | |
| RX1A-1000 | Striker | 1000 | 55 | 60 | 8.5 | 3.5 | 7.5 | 12.5 | |
Table 2
| Models | Components. | Rated insulation voltage (V) | Dimensions/ Sizes(mm) | Weight (g) | |||||
| Fig. | L1 | L2 | D | d | A | ||||
| RX1-1000 | Striker base | 1000 | Figure 2 | 54.5 | 114 | 27 | 22.5 | 41-88 | 42 |
| RX2-1000 | |||||||||
| RZS1-1000 | Striker base | 1000 | Figure 2 | 36.5 | 90 | 28 | 26 | 30-72 | 33 |
| RX1A-1000 | Striker base | Prepared and decided by the customer | 27 | ||||||
More informations please check our website H.V. & L.V. Fuse Link & Base
