moisture meter 1.sensor drying protection device 2.self-calibrating of zero point 3.automatic calibration
moisture meter
1. Self-calibrating of zero point and slope at starting up (proprietary technology)
2. Calibration of dew point with full-scale range by single-point method (proprietary technology)
3. Sensor drying protection device (proprietary technology)
4. Operation and control by color touch screen
5. Real-time curve display
6. Storage and printing of measurement data
7. Intelligent prompting of electricity quantity, automatic calibration for slope of intelligent charging protection (proprietary technology)
Technical parameters
Measurement of dew point | -80…+20°C, when the dew point temperature is lower than 0°C, the output of sensor is frost point | |
Typical precision | superior than ±1°C | |
Response time (Td) | When the gas temperature is 20°C
| -60→-20°C 5s (63%), 10s (90%)
|
-20→-60°C 45s (63%), 10min (90%) | ||
Operation environment | Temperature | -10…+60°C |
Relative humidity | 0…100%RH | |
Pressure | 1 barometric pressure | |
Parameter of complete appliance | Working flow | no influence |
Power supply | built-in lithium battery (8000mAh), AC/DC | |
Charging time | over 6 hours (with intelligent charging protection) | |
Using time | >10 hours | |
| Digital output | RS232 USB interface |
Printing | 24 characters/row, stylus printer | |
Dimension | 250mm×250mm×100mm | |
Weight | about 3.5kg | |
1. Real-time curve display
2. Printing of measured data
3. Storage of measured data
4. Display of system time
5. Display of intelligent electricity quantity
6. Setting of printing data
7. File storage system
8. Network communication
9. Chinese and English bilingual interface
ZA-3000 series instrument data management system
