Used to absorb H2S in the biogas or other gases.Have prompt goods, when receive the payment,arrange the delivery at once. ISO9001:2008 certification. Introduction MT-1 normal temperature ferric oxide desulfurizer, it's main activity component is ferric oxide, it is a high efficient normal temperature desulfurizer. It has big sulfur capacity, high degree of purification, good strength, no degradation in water, easy to regenerate and other characteristics. Even under the conditions has no oxygen and ammonia, also has high-precision of remove H2S, and has a certain effect to remove organic sulfur. MT-2 composite ferric oxide desulfurizer is on the basis of MT-1, use the unique productive technology, added a little high-activity component. Has high-precision of remove H2S, high reaction speed, wide range of H2S removal, big working sulfur capacity in anaerobic conditions, and other characteristics. MTZ series ferric oxide desulfurizer is a kind of biogas dedicated high-efficient desulfurizer which our company produced according to the special nature of biogas. It has the characteristics of good selectivity, big sulfur capacity (working sulfur capacity above 30%), high-precision of H2S removal, no degradation in water, and easy to regenerate, etc. MT series ferric oxide desulfurizer mainly used in H2S removal in water gas, semi-water gas, coke-oven gas, biogas, nature gas, liquefied gas, waste gas, oil field gas from city gas, fertilizer, coking, citric acid, winery, metallurgy, textile, light industry, electron, environmental protection and other industries. When use the products, it also has simple equipment, easy to operate, adaptable, small resistance of bed and other features. Performance and characteristics 1. Technological conditions Temperature: 10-80℃. Airspeed: 500-1500h-1. Superficial velocity: 0.10-0.30m/s. Pressure: normal pressure -8MPa. Humidity: Humidity is as bigger as better, the best is near to saturated steam, but strictly prohibit to bring water to the bed. Bed height-diameter ratio: ≥3. 2. When remove sulfur don't need special heating, but the desulfurization device must keep warm which is outside in winter from the gas is undercooling, or can lower the desulfurizer activity and bed waterlogging which can worsen the operation. 3. The aequum of desulfurizer is determined by the following conditions: 1). The H2S concentration and gas flow in the feed gas. 2). Sulfur capacity of desulfurizer. 3). Volume size of desulfurizer tower.